Spray and rinse sealant makes paint care effortless!
CarPro Hydro2 Touchless Silica Sealant might possibly be the most revolutionary car care product you’ll ever purchase! CarPro Hydro2 Touchless Silica Sealant is spray-on, rinse-off paint sealant that provides durable UV protection and jaw-dropping water repellent properties. Unlike a traditional car wax or sealant that requires rubbing and buffing, CarPro Hydro2 Touchless Silica Sealant simply needs to be sprayed on and rinsed off. It’s that easy!
Keeping your car clean is simple – or is it? In order for your paint to stay clean and shiny in between washes, the surface needs to exhibit excellent water sheeting properties. Water sheeting is created by surface tension, which is an attribute of a high-quality paint coating or paint sealant, like CarPro Hydro2 Touchless Silica Sealant. The more surface tension present on your paint, the less likely it will stay dirty as water will simply roll off, taking dirt and other contaminants with it. CarPro Hydro2 Touchless Silica Sealant is one of the most hydrophobic paint care products available – water simply rolls off the surface immediately upon contact.
The secret to CarPro Hydro2 Touchless Silica Sealant lies in its advanced chemistry. Formulated using hydrophilic glass fibers, silicon polymers and advanced fluoropolymers, Hydro2 provides a remarkably glossy, slick finish that complements its superb paint protection. CarPro Hydro2 Touchless Silica Sealant can only be described as one of the most advanced surface care protection products available.
Spray on and rinse off – that’s how simple CarPro Hydro2 Touchless Silica Sealant is to apply. Read that sentence again – notice anything? There is no rubbing or buffing when you apply CarPro Hydro2 Touchless Silica Sealant. Simply wash your car like you normally would and while it’s still wet, spray Hydro2 over every surface including paint, wheels, chrome, convertible tops, and glass, and simply rinse it off. After you’ve thoroughly rinsed Hydro2 off the surface, dry the vehicle with a quality microfiber drying towel or car dryer, like the Metro Master Blaster, and your vehicle will be protected for up to 3 months.
CarPro Hydro2 Touchess Silica Sealant is a concentrated solution. You dilute 1 part concentrate with 3 parts water – we recommend using a SprayMaster Heavy Duty Spray Bottle.
DO NOT USE IN DIRECT SUNLIGHT. Thoroughly clean the surface(s) to be protected. Do NOT use any type of wash and wax product as this will interfere with the bonding of Hydro2. To ensure the surface is free of any previously applied waxes and sealants, we recommend adding two ounces of Pinnacle Signature All Purpose Cleaner to your wash bucket.
Diluted Hydro2 1 part concentrate to 3 parts water into a spray bottle.
Working on a third of the vehicle at a time (while it’s still wet), spray a fine mist of Hydro2 directly onto the surface.
Thoroughly rinse off using a strong jet of water.
Continue this method until entire vehicle has been treated.
Dry the vehicle using a high quality microfiber drying towel or car dryer, like the Metro Master Blaster.