CarPro Hydro2 Lite Touchless Silica Sealant 1 Liter

For a limited time, receive a FREE 16x16 Black Edgeless Microfiber Towel with every purchase of CarPro Hydro2 Lite Touchless Silica Sealant 1 Liter

The ready-to-use version of CarPro’s Hydro2 Touchless Silica Sealant!

CarPro Hydro2 Lite Touchless Silica Sealant might possibly be the most revolutionary car care product you’ll ever purchase! CarPro Hydro2 Lite Touchless Silica Sealant is spray-on, rinse-off paint sealant that provides durable UV protection and jaw-dropping water repellent properties. Unlike a traditional car wax or sealant that requires rubbing and buffing, CarPro Hydro2 Lite Touchless Silica Sealant simply needs to be sprayed on and rinsed off. It’s that easy!

Keeping your car clean is simple – or is it? In order for your paint to stay clean and shiny in between washes, the surface needs to exhibit excellent water sheeting properties. Water sheeting is created by surface tension, which is an attribute of a high-quality paint coating or paint sealant, like CarPro Hydro2 Lite Touchless Silica Sealant. The more surface tension present on your paint, the less likely it will stay dirty as water will simply roll off, taking dirt and other contaminants with it. CarPro Hydro2 Lite Touchless Silica Sealant is one of the most hydrophobic paint care products available – water simply rolls off the surface immediately upon contact.

The secret to CarPro Hydro2 Lite Touchless Silica Sealant lies in its advanced chemistry. Formulated using hydrophilic glass fibers, silicon polymers and advanced fluoropolymers, Hydro2 provides a remarkably glossy, slick finish that complements its superb paint protection. CarPro Hydro2 Lite Touchless Silica Sealant can only be described as one of the most advanced surface care protection products available.

Spray on and rinse off – that’s how simple CarPro Hydro2 Lite Touchless Silica Sealant is to apply. Read that sentence again – notice anything? There is no rubbing or buffing when you apply CarPro Hydro2 Lite Touchless Silica Sealant. Simply wash your car like you normally would and while it’s still wet, spray Hydro2 over every surface including paint, wheels, chrome, convertible tops, and glass, and simply rinse it off. After you’ve thoroughly rinsed Hydro2 Lite off the surface, dry the vehicle with a quality microfiber drying towel or car dryer, like the BLACKFIRE Car Dryer, and your vehicle will be protected for up to 3 months.

Unlike the original Hydro2 formula, CarPro Hydro2 Lite Touchless Silica Sealant does not need to be diluted. Use the included sprayer and simply spray and rinse!

Directions:

1. DO NOT USE IN DIRECT SUNLIGHT. Thoroughly clean the surface(s) to be protected. Do NOT use any type of wash and wax product as this will interfere with the bonding of Hydro2 Lite. To ensure the surface is free of any previously applied waxes and sealants, we recommend adding two ounces of Pinnacle Signature All Purpose Cleaner to your wash bucket.
2. Shake well.
3. Working on a third of the vehicle at a time (while it’s still wet), spray a fine mist of Hydro2 Lite directly onto the surface.
4. Thoroughly rinse off using a strong jet of water.
5. Continue this method until entire vehicle has been treated.
6. Dry the vehicle using a high quality microfiber drying towel or car dryer, like the BLACKFIRE Car Dryer.

1 Liter