|Long lasting, durable UV protection for your boat’s bimini top and all outdoor vinyl.|
Your boat’s bimini top offers shelter and and shade from the elements. It provides protection by bearing the full brunt of the sun’s UV rays. Bimini tops are also exposed to rain, saltwater, insects and bird droppings. Clean your bimini top on a regular basis and protect it with Bimini Topp Marine Vinyl Protectant from Wolfstein’s Pro Series.
Bimini Topp Marine Vinyl Protectant is designed exclusively for outdoor vinyl exposed to the elements. It penetrates and absorbs, forming a water-tight bond to outdoor vinyl surfaces such as bimini tops, fender covers, sailboat dodgers, sailboat spray hoods, sailboat covers and sail covers. Marine Fabric Protectant can also be used on outdoor vinyl cushions, umbrellas and awnings.
Wolfstein’s Bimini Topp Marine Vinyl Protectant contains Ciba Tinuvin® UV Blockers that helps new bimini tops maintain their appearance longer. This strong protectant offers maximum protection against water, acid rain, oil, grease, salt, insects and bird droppings. Resilient water repellency renews after each washing, and Marine Vinyl Protectant won’t wash off! This VOC compliant formula contains no silicone or petroleum solvents and will not damage or weaken vinyl. This premium protectant extends the useful life of your bimini top and other outdoor vinyl.
Helps new bimini tops maintain their appearance longer.
Renews and extends the life of older bimini tops.
Micro-bonding fluoropolymer formula.
Contains no silicone, freon or CFCs.
Ozone friendly to meet California Air Quality Standards.
- For best results, shake well before use.
Vinyl must be thoroughly dry before applying Bimini Topp Marine Vinyl Protectant. Clean vinyl with Bimini Topp Premium Marine Cleaner first, before applying protectant.
Hold bottle approximately 18-24 inches away from vinyl surface to be treated and spray lightly using wide, sweeping motions.
Allow top to dry 10-15 minutes between coats. Working in direct sunlight will speed up the drying time and enable you to apply additional coats much sooner. Once dry to the touch, you can apply additional coats. Allow 24 hours for the micro-bonding process to set. Immediately wipe overspray off surround areas with a Cobra Microfiber Towel.
Two to three coats of Wolfstein’s Bimini Topp Marine Vinyl Protectant are recommended for the first application, then reapply as needed.