Speed Master Clay Mitt
When you feel the need… the need for a speedy contaminant removal!
The Speed Master Clay Mitt is contamination’s worst nightmare. The Speed Master Clay Mitt quickly and rapidly removes embedded contaminants off your car’s surface using its tough, impurity grabbing, clay outer grip. The Speed Master Clay Mitt can also be used then washing down a car to seize contaminants when wet. When needed again, simple rinse and re-use the Speed Mater Clay Mitt.
If coming up positive for filth after using the visual and baggie test to investigate for contaminants on your car, it’s time to turn to the Speed Master Clay Mitt. Instead of messing around with a slab of clay, the Speed Master Clay Mitt, does the same job without having to constantly knead the clay.
The Speed Master Clay Mitt is designed with the smoothness of your car in mind. This mitt is designed to help remove dirt, paint overspray, rail dust, industrial fallout, brake dust, bonded elements, tree sap and other harmful contaminants from your car safely. Whatever is not supposed to be on your car’s clear coat, the Speed Master Clay Mitt will find and do away with it. While at the same time, the clay material is not damaging to your car’s surface. The effective power of the mitt’s decontamination is proven by the mitt grabbing the contaminants off the car and embedding them into the clay.
Decontamination with clay can be a lot of fun if you don’t mind having to mess around with sculpting, shaping, and kneading the clay. But sometimes, you just want to get the job done quickly and easily, with minimal effort involved. The Speed Master Clay Mitt saves you both time and energy. Simply slide the Speed Master Clay Mitt onto your hand, apply the lubricant and go to work! You don’t have to worry about the pressure of your fingers in the clay leaving imprints on the car, rather the mitt keeps everything smooth and even for you.
Not only can the Speed Master Clay Mitt be used with clay lubricant to decontaminate your car when dry, it can also be used during the car washing process, when the surface is lubricated with soap. You can save a step by doing the decontamination at the same time as the wash. The clay surface of the mitt will glide over the slick car surface, only hitting a rough spot when it hits a contaminant, that will be quickly removed. To use again, simply remove all lose debris, clean with BLACKFIRE Synthetic Clay Mitt Cleaner, and rinse!
Directions for Use:
*Pro-Tip: Work only on a cool surface and out of direct sunlight.
When washing:
When using the Clay Mitt during your regular washing routine, first remove all lose dirt and debris.
Submerge the Clay Mitt in your bucket of soapy water and use the mitt your vehicle one panel at a time.
Be sure to start at the top and make your way toward the bottom to avoid cross contamination.
Regularly reload the Clay Mitt with soap and water for ample lubrication.
Rinse and dry your vehicle as normal.
When using clay lubricant: When using Clay Mitt on its own with a dedicated clay lubricant, first wash the car to remove all loose dirt and debris.
Spray a liberal amount of clay lubricant onto the surface, working one panel at a time.
Gently move the Clay Mitt back and forth across the paint in a crisscrossing pattern.
Dry the panel you’ve just worked on before moving on to the next panel.
The Speed Master Clay Mitt is contamination’s worst nightmare. The Speed Master Clay Mitt quickly and rapidly removes embedded contaminants off your car’s surface using its tough, impurity grabbing, clay outer grip. The Speed Master Clay Mitt can also be used then washing down a car to seize contaminants when wet. When needed again, simple rinse and re-use the Speed Mater Clay Mitt.
If coming up positive for filth after using the visual and baggie test to investigate for contaminants on your car, it’s time to turn to the Speed Master Clay Mitt. Instead of messing around with a slab of clay, the Speed Master Clay Mitt, does the same job without having to constantly knead the clay.
 |
 |
The Speed Master Clay Mitt is designed with the smoothness of your car in mind. This mitt is designed to help remove dirt, paint overspray, rail dust, industrial fallout, brake dust, bonded elements, tree sap and other harmful contaminants from your car safely. Whatever is not supposed to be on your car’s clear coat, the Speed Master Clay Mitt will find and do away with it. While at the same time, the clay material is not damaging to your car’s surface. The effective power of the mitt’s decontamination is proven by the mitt grabbing the contaminants off the car and embedding them into the clay.
 |
 |
Decontamination with clay can be a lot of fun if you don’t mind having to mess around with sculpting, shaping, and kneading the clay. But sometimes, you just want to get the job done quickly and easily, with minimal effort involved. The Speed Master Clay Mitt saves you both time and energy. Simply slide the Speed Master Clay Mitt onto your hand, apply the lubricant and go to work! You don’t have to worry about the pressure of your fingers in the clay leaving imprints on the car, rather the mitt keeps everything smooth and even for you.
Not only can the Speed Master Clay Mitt be used with clay lubricant to decontaminate your car when dry, it can also be used during the car washing process, when the surface is lubricated with soap. You can save a step by doing the decontamination at the same time as the wash. The clay surface of the mitt will glide over the slick car surface, only hitting a rough spot when it hits a contaminant, that will be quickly removed. To use again, simply remove all lose debris, clean with BLACKFIRE Synthetic Clay Mitt Cleaner, and rinse!
Directions for Use:
*Pro-Tip: Work only on a cool surface and out of direct sunlight.
When washing:
When using the Clay Mitt during your regular washing routine, first remove all lose dirt and debris.
Submerge the Clay Mitt in your bucket of soapy water and use the mitt your vehicle one panel at a time.
Be sure to start at the top and make your way toward the bottom to avoid cross contamination.
Regularly reload the Clay Mitt with soap and water for ample lubrication.
Rinse and dry your vehicle as normal.
When using clay lubricant: When using Clay Mitt on its own with a dedicated clay lubricant, first wash the car to remove all loose dirt and debris.
Spray a liberal amount of clay lubricant onto the surface, working one panel at a time.
Gently move the Clay Mitt back and forth across the paint in a crisscrossing pattern.
Dry the panel you’ve just worked on before moving on to the next panel.
Items You Might Need
You Might Like...
