Product description
This durable synthetic sealant offers months of protection with a deep high-gloss finish. It’s formulated with SiO2, or silicon dioxide, which forms a hard coating when you apply it. The hydrophobic properties make water bead up and slide right off the surface, so you don’t experience water spots. Wolfgang SiO2 sealant also resists sun fading and makes it easier to clean dirt and grime so you can spend more time enjoying your vehicle.
Modern Car Care
By using SiO2 self-cleaning car paint sealant from the Wolfgang Concours-Series, you get professional results that blend modern technology with classic personality. You’ll be able to see your reflection when you’re done adding this protective formula. Simply clean and prep the paint surface to remove any residual grime, apply the sealant with a foam applicator, wait for 15-20 minutes and buff with a microfiber towel. Just keep it dry for at least 12 hours for a full cure, so the sealant doesn’t get washed away.
After spending hours detailing a vehicle, you don’t want that work to go to waste. Adding a sealant gives you the most effective protection and a look you’ll be proud to display. Wolfgang SiO2 can also be used on glass, wheels and other hard, non-porous, smooth surfaces to give them the same protective shine. Watch our instructional video to see how to create a lasting high-gloss shine with SiO2 paint coatings — or check out the Product Reviews gallery to see the results.
The only thing more important to a detailer than their vehicle is their time. While people who have a passion for detailing may enjoy themselves while they diligently work to carefully apply an even layer of wax or sealant to their car, they are still wishing the whole time that they were able to get the whole job done much faster. The technology that goes into the detailing product available to us has been steadily evolving and SONAX Spray and Seal is a revolutionary leap forward in the advancements of detailing protective products. SONAX Spray and Seal is a high-quality sealant that can be applied simply by spraying it on your paint and rinsing it off. In as short as 5 minutes, you could have your entire vehicle sealed and road ready when you use SONAX Spray and Seal. This incredibly convenient application process will allow you to cut your detailing time drastically!
Your paint is constantly at high risk of extremely dangerous contaminants and environmental hazards that threaten to rob your paint of the luster you have put so much time into cultivating. You need to provide you paint with a desperately needed level of protection that will prevent these dangers from having the chance to ruin your immaculate paint. SONAX Spray and Seal will allow you to protect your paint from dangerous elements such as road grime, dirt, and other surface contaminants. This will ensure that your paint is always safeguarded against the endless assault of contaminants that seek to destroy it.
Water resting on your car's surface is not only an annoyance that ruins the shine on your paint, it also has the potential to instill quite a bit of damage to your paint. Resting water can cause water spots, which contain minerals that will gradually etch their way into your clear coat and cause irreparable damage. SONAX Spray and Seal greatly reduces the threat of water spots by providing a durable, and most importantly, hydrophobic layer of protection over your car's surface. This hydrophobic layer will cause water to bead and sheet off your car, meaning it never gets the chance to etch water spots into your paint.
Directions:
- Shake well!
- Apply to a cool surface out of direct sunlight.
- Wash and dry entire vehicle before application.
- Use Wolfgang Perfekt Finish Paint Prep to remove any remaining oils that would prevent the paint sealant from properly adhering to the surface.
- Apply Wolfgang SiO2 Paint Sealant onto a foam or microfiber applicator pad and apply to surface, working one panel at a time.
- Allow a cure time of approximately 15-20 minutes before buffing away with a microfiber towel.
- Do not expose surface to moisture for approximately 12 hours after application.
Specifications:
| SKU(s) | WG-0055 |
| Product Form | Liquid |
| Applicable Finishes | Paintwork |
Related Products
product reviews
Shipping & Returns
Shipping
Free Shipping on most orders over $75
*Some oversized or heavy items may not qualify. View full details.
See our Shipping FAQ for more information.
Returns
We offer returns for 30 days after your order date.
Some restrictions apply. See our Returns Policy for more information.
