> > > IK Foam Pro 2 Sprayer

IK Foam Pro 2 Sprayer

The IK Foam Pro 2 Sprayer is a professional level pressurized sprayer that is designed to generate the perfect level of foam to optimize the effectiveness of your products. By using a special pressurizing system, the IK Foam Pro 2 Sprayer will allow you to not only generate a more consistent application of product, but it will also save you quite a lot of hand fatigue in the process. The IK Foam Pro 2 Sprayer comes with various different nozzles that will not only generate a sufficient foam with any product but will also allow you to choose which TYPE of foam you’d prefer! The IK Foam Pro 2 Sprayer can be used with pretty much any product on the market today due to its highly chemical resistant nature!

The large majority of products that you will use on your car’s paint are meant to be applied by spraying them on the surface. While it is possible to use the traditional sprayer to apply these products, the IK Foam Pro 2 Sprayer was designed to make the spray application of such products much easier and more effective than what you are used to. The IK Foam Pro 2 Sprayer accomplishes such a task by introducing many innovative features that you will be able to greatly appreciate!

The first of these features is the IK Foam Pro 2 Sprayer’s ability to generate a thick foam out of any product that you use it with. When you are applying a product like an All-Purpose Cleaner or a Degreaser, the product will be able to work much more effectively in a foam form. The foam allows the product to stick to the surface longer without simply running off immediately. The longer the product is on the surface, the more time it is allowed to work and generate the results you’d like to see!

Another feature of the IK Foam Pro 2 Sprayer that we can all appreciate is the vast reduction in hand fatigue that it affords to you. Applying a product like a Spray Wax or Quick Detailer requires a lot of product to work effectively. When you are applying it to your entire car, you will start to feel your hand cramping as you pump away with traditional sprayers. With the IK Foam Pro 2 Sprayer, however, you can generate a large amount of pressure at once and gradually use that pressure to apply your product over a longer amount of time without the need for constant pumping!

Throughout your detailing expeditions, you are bound to use a wide range of products, some of which will be much more corrosive than others. The IK Foam Pro 2 Sprayer saves you from having to worry about these more corrosive products eating away at your sprayer from the inside out. Due to the Polypropylene and Polyethylene tank and the high-quality FPM Viton® seals and washers, the IK Foam Pro 2 Sprayer is capable of handling even some of the harshest chemicals used in the detailing industry!

42 oz. useful capacity 64 oz. total capacity

IK Foam Pro 2 Sprayer

Our Price: $42.95
Item ID: IK-81676
Availability: Usually ships the same business day
Bookmark and Share

You Might Like...

IK Multi 1.5 Sprayer
Our Price: $29.99
2 Reviews


Review Summary
4.2
5 Reviews
5
60% (3)
4
0% (0)
3
40% (2)
2
0% (0)
1
0% (0)
60% Recommend this product (3 of 5 responses)
Bowlus, MN
Nice Sprayer but not as much foam as the 1.5
I own the 1.5 IK foam sprayer and love it. It foams great so I had high hopes for this new one here, but it is not foaming up nearly as much as I want it to and I am using the correct dilution ratios. Also every time I pump the sprayer it seems like it releasing pressure without me doing anything, and I am not over pumping it either.

I will keep playing with it and see if I can figure something out. On a side note, the sprayer has a great build quality to it and I love the capacity of it as well.
ProsBuild Quality
ConsVery low pressure it seems like. Not much foam
LOS ANGELES, CA
Amazing Product good performance once you fine tweak the settings
I was excited of this purchase, I wanted something that can foam my wheel cleaner solution to help lift the dirt off the surface vs just running down the sides.

This foam sprayer has been used with the following
Chem Guys Wheel Clenaer (works great with a 3:1 dilution)
Sonax Wheel Cleaner Plus (Works good with a 2:1 dilution sprayer nozzle gets clogged sometimes)
P&S Brake Buster (Works good with a 2:1 or 3:1 dilution)

The issue i found were primarily from different solution viscosity, the thicker the formula you will get less consistent foam, and the nozzle gets clogged. I have tried various nozzle adapters based on different types of solutions used.

The sprayer requires a good amount of water to solution ratio in order to give you maximum foaming results. You will need to play around with it.
ProsFantastic product works like a charm Easy to use once setup correctly Nice wide base provides stability trigger lock to prevent unwanted discharge
Consuses a fair amount of product depending on how thick of a solution is being used will hinder performance, a good dilution ratio helps with the foaming action. Very Tricky to setup initially allot of trial and error is required. foam leaks out from the handle and top when depressurizing the canister.
University park, Florida
I wanted to love this.
Maybe I got a defective one? Bubbles out underneath the screw cap. The spray tip was just not working like it should have. I swapped out the tip from the IK multi sprayer and it worked a lot better. I still have a bad taste from the initial usage of it. I followed all directions from dilution ratios to the proper level to fill it for maximized usage.
ProsPotentially really handy. Love the new upgrades from the old line.
ConsJust didn't do what I wanted it to do.
Westminster, MD
Good Results
I'm a weekend warrior detailing my own vehicles, so this will not see professional level use. This is the very first foam sprayer I have ever used and/or owned, so far I like what's doing for me. I use it for foaming my wheels and engine bay, that's a big time saver over using a trigger spray bottle. I don't think it would be very useful to spray foam wash because of it's limited capacity, but I guess it would work. A foam cannon would be much more useful for that.

I do like the wide base. It's very stable and has not fallen over from any surface I put it on.

I also like the spray trigger lock. That comes in handy while pumping the unit up to pressure so you don't accidentally spray foam.

I would buy this again.
ProsStable base. Locking spray trigger.
Elk Grove Village, Illinois
THE foamer to have!
Before I bought the IK Foam Pro2 I had been using 2 of their IK 1.5 foamers and loved them. I have 2 so I can use one for wheel cleaners and the other for Griot's Garage Poly Gloss, no cross contamination here!

When I heard about the larger size and other improvements i knew i was getting one...and i did! Being able to add more product means more pressure and less pumping it up, a conviencence but the additional improvements were icing on the cake. The non tipable base is a welcomed addition as is the easy to grip top for screwing and unscrewing. Finally the storage area in the handle is a great use of space and helps you keep things organized as far as tips and new foam screens.

If you don't have one yet, THIS is the one to have, if your like me and already have 1 or 2 of the IK 1.5, make room for a new family member!
Pros-Larger capacity -More pressure -Longer work time -Non tipable base -Easy to grip container -Built in tip storage
ConsZERO!