CARPRO Lift Snow Foam

If you have heavy or stubborn debris on a car, it may take more than shampoo to remove it. CARPRO Lift is a professional alkyl snow foam pre-wash that softens the grime and “lifts” it off the surface so it’s easier to remove during the main wash. By letting the high-pH foam soak into dirt, pollen, road grime and bugs, you won’t need to scrub as hard, which means a lower risk of scratching your prized paint. When diluted to the recommended 1:10 ratio, you also can use Lift snow foam to remove old waxes and sealants. And there’s no underestimating how fun it is to spray a car down with foam.

1. Use only on cool surfaces. Do not use in direct sun. Do NOT allow to dry on surface.
2. Dilute Lift with water (we recommend 1:10). You can use leaner ratios for a more flowing mixture or a richer ratio for a denser foam.
3. Allow the product to remain on the surface for a minute or as long as possible without allowing too dry.
4. Power rinse off. This completes your Lift Pre-Wash.
5. Wash with CARPRO Reset.

How to use as Single Wash Solution:

1. Use only on cool surfaces. Do not use in direct sun. Do not allow shampoo to dry on the surface!
2. Pre-rinse vehicle with free-flowing water to remove loose debris
3. Dilute Lift with water (we recommend 1:10). You can use leaner ratios for a more flowing mixture or a richer ratio for a denser foam.
4. Allow the product to remain on the surface for a minute and then wash from the top down using our favorite wash mitts.
5. Its critical to rinse your mitt or sponge periodically in a second bucket filled with clear water or with a hose.
6. After washing, rinse the vehicle thoroughly with free-flowing water to remove shampoo residue, and dry with a microfiber towel.