Remove harmful iron deposits and protect your paint!

Iron X by CarPro is an acid-free, pH-balanced iron remover that decontaminates auto paint and wheels. Iron X prevents the spread of iron-related damage to protect your vehicle from paint system failure. Your vehicle constantly faces unseen threats. Remove them with Iron X!

Airborne chemical compounds and ferrous (iron-containing) particles penetrate auto paint and create corrosive compounds that eat into the paint's sublayers. Detailing clay removes the particles but it doesn't remove their effects - corrosion may already be creeping under the paint's surface.

The only way to truly remove ferrous particles is with a dedicated iron remover like Iron X. Iron X opens up the paint's pores to release iron particles and to neutralize the caustic compounds that have developed as a result of the particle. In one step, you can eliminate the cause and its effects. Put an immediate stop to paint damage before it's too late.

IronX turns purple as it removes iron-containing particles.

Iron X is excellent on automotive paint and safely cleans clear coats. Iron X is highly recommended for all clear coated alloy wheels. Brake dust and road grime become baked onto wheels. Brake dust contains high  levels of iron and can quickly pit clear coated wheels. Iron X easily removes ferrous brake dust to protect your wheels from further damage. Iron X can save you the cost of replacing your factory wheels!

Note: Iron X should not be used on bare metal parts, brake calipers, wheel balancing weights, or SMART paint repairs. Mask off these areas. Avoid letting Iron X dry on any surface.

Iron X is easy to use and you can see it working! Iron X is a clear solution in the bottle but it turns purple when it comes into contact with sintered iron particles. Iron X turns the iron into a water soluble complex for easy removal. After five minutes of dwell time, wipe down the surface and rinse thoroughly. After using Iron X, you can polish and clay your vehicle as you normally would. Always apply a coat of wax or paint sealant after using Iron X.

Proper vehicle care means cleaning above and below the paint's surface. Iron X Iron Remover removes iron particles and their effects to keep the paint clean and healthy.

Directions:

1. Wash the car or wheels surfaces, make sure surface is in cool temp.
2. Shake well, spray on the surface. Rub it in with damp sponge thoroughly.
Wait 5 min. while contaminants change its color to purple/red. Wipe off with damp soft sponge. Don’t let the IronX dry completely on surface!
3. Rinse well or power wash the whole surface. The vehicle is ready to clay now.