Home > Shop By Brand > Meguiar's Car Care Products > Meguiar's Products > Meguiars M105 Ultra-Cut Compound 8 oz.
Meguiars M105 Ultra-Cut Compound 8 oz.
Exclusive, super-micro abrasive technology cuts ultra fast!
Meguiars Mirror Glaze #105 Ultra-Cut Compound is a ultra fast-cutting compound for rapid paint correction with minimal compounding swirls. Super-micro abrasives leave a "best in class" finish that requires very little finishing work. Remove your vehicle’s worst imperfections quickly with professional grade Meguiars Mirror Glaze 105 Ultra-Cut Compound. DA Approved Version.
Meguiars Mirror Glaze #105 Ultra-Cut Compound utilizes exclusive, super-micro abrasive technology that effectively levels blemishes and leaves a nearly wax-ready finish. Unlike traditional compounds that leave compounding swirls, Meguiars Mirror Glaze #105 Ultra-Cut Compound leaves a deep shine with few – if any – swirl marks! A quick pass with a finishing polish will completely restore the shine and prepare the paint for wax.
The real benefit of Meguiars Mirror Glaze 105 Ultra-Cut Compound is how fast it works! The super-micro abrasives cut quickly to remove 1200 grit sanding scratches, acid rain, and severe swirls and holograms. Rather than going over and over the same spot, you can remove the blemish and move on to the next step. Because #105 Ultra-Cut Compound does work so quickly and with such small abrasives, it leaves a smooth, glossy finish. For professional detailers, Ultra-Cut Compound is a time-saver!
Meguiars Mirror Glaze #105 Ultra-Cut Compound is body shop safe, paintable, and contains no fillers. This safe, VOC compliant formula can be used on all paint finishes, including scratch-resistant and conventional clear coats.
Meguiars Mirror Glaze 105 Ultra-Cut Compound should be applied with a polisher if you plan to compound the entire vehicle. Work at a maximum speed of 1500 to 2000 RPM with a foam or wool cutting pad. Work until the compound starts to dry. Wipe off the residue with a clean Cobra Microfiber Towel. If necessary, follow up with Meguiars Mirror Glaze #205 Ultra Finishing Polish to completely restore the gloss.
Meguiars Mirror Glaze #105 Ultra-Cut Compound can also be used by hand around door handles, spoilers, and anywhere else the polisher cannot be used. Use a foam or microfiber applicator pad and rub the compound on the desired area. Wipe off the residue with a clean Cobra Microfiber Towel.
Meguiars Mirror Glaze #105 Ultra-Cut Compound is the ultimate compound for fast paint correction with few compounding swirls.
Features:
Ultra-fast cutting removes 1200 grit or finer sanding marks
Super-micro abrasives leave best in class finish
Also great for removing scratches, defects, acid rain and severe swirls/holograms
8 fl. oz. (236 ml.)
Meguiars Mirror Glaze #105 Ultra-Cut Compound is a ultra fast-cutting compound for rapid paint correction with minimal compounding swirls. Super-micro abrasives leave a "best in class" finish that requires very little finishing work. Remove your vehicle’s worst imperfections quickly with professional grade Meguiars Mirror Glaze 105 Ultra-Cut Compound. DA Approved Version.
|
|
Meguiars Mirror Glaze #105 Ultra-Cut Compound utilizes exclusive, super-micro abrasive technology that effectively levels blemishes and leaves a nearly wax-ready finish. Unlike traditional compounds that leave compounding swirls, Meguiars Mirror Glaze #105 Ultra-Cut Compound leaves a deep shine with few – if any – swirl marks! A quick pass with a finishing polish will completely restore the shine and prepare the paint for wax.
The real benefit of Meguiars Mirror Glaze 105 Ultra-Cut Compound is how fast it works! The super-micro abrasives cut quickly to remove 1200 grit sanding scratches, acid rain, and severe swirls and holograms. Rather than going over and over the same spot, you can remove the blemish and move on to the next step. Because #105 Ultra-Cut Compound does work so quickly and with such small abrasives, it leaves a smooth, glossy finish. For professional detailers, Ultra-Cut Compound is a time-saver!
Meguiars Mirror Glaze #105 Ultra-Cut Compound is body shop safe, paintable, and contains no fillers. This safe, VOC compliant formula can be used on all paint finishes, including scratch-resistant and conventional clear coats.
Meguiars Mirror Glaze 105 Ultra-Cut Compound should be applied with a polisher if you plan to compound the entire vehicle. Work at a maximum speed of 1500 to 2000 RPM with a foam or wool cutting pad. Work until the compound starts to dry. Wipe off the residue with a clean Cobra Microfiber Towel. If necessary, follow up with Meguiars Mirror Glaze #205 Ultra Finishing Polish to completely restore the gloss.
Meguiars Mirror Glaze #105 Ultra-Cut Compound can also be used by hand around door handles, spoilers, and anywhere else the polisher cannot be used. Use a foam or microfiber applicator pad and rub the compound on the desired area. Wipe off the residue with a clean Cobra Microfiber Towel.
Meguiars Mirror Glaze #105 Ultra-Cut Compound is the ultimate compound for fast paint correction with few compounding swirls.
Features:
8 fl. oz. (236 ml.)
 |
 |
2006 RedFire Mustang GT polished with Meguiars M105 and M205 and protected with Meguiars #21 Synthetic Sealant. M105 removes swirls with ease, M205 restores a rich, glossy finish and #21 Synethic Sealant provides durable cross-linking polymer protection and a deep, wet gloss. This combination of products is popular with professional detailers who seek the absolute perfect finish. |
Items You Might Need
You Might Like...
Review Summary
4.5
22 Reviews
5
64% (14)
4
27% (6)
3
9% (2)
2
0% (0)
1
0% (0)
55% Recommend this product (12 of 22 responses)
By Vincent
Cliffside Park, NJ
Does the job
June 2, 2020
The 105 does the job, I recommend working smaller (18'x18')areas as the wipe off needs a little extra elbow grease if you do bigger areas. I can be wrong as i am not a pro detailer but can only speak from my experience.
Prosgets the scratches out
Consmy experience best to do smaller areas as it dries and harder to get off.
By W C.
Baltimore , Maryland
Good, but old school
August 24, 2019
This is a good cutting compound, but it can be tough to remove if you're not careful because it dries quickly. It gets the job done, though. Plus, you can't beat the price.
By Jordon
North Las Vegas, NV
Easy to use
August 8, 2019
Worked great and easy easy to use. However it did dust a lot.
By walt
California
Great Product
January 26, 2019
Have used this on my BMW and it did a great job.
ProsEasy to use with orbital
ConsIf you don't use regularly it can dry out
By JM
Wisconsin
Yes, it works, but...
November 7, 2018
Used as directed with a DA over a clear coat that had not been touched in two years, but still looked decent. The product tends to dry and harden quickly. That makes removal extra work because you will have to rub hard to get it off. If I use it again, I will work small areas (18" square) to attempt easier removal. The final result was as very clean surface with most minor scratches removed.