CARPRO Gliss 30 mL

CARPRO Gliss is a revolutionary top coating application that will leave your vehicle with a super smooth finish, UV protection, and the ultimate water-resistance. CARPRO Gliss is oil-free, has anti-static properties, and is silicone free leaving no contaminants behind on your top coat.

As a Primary Coat
Wash with CARPRO Reset, decontaminate, and polish with CARPRO Reflect. If heavier cut is needed, may start with CARPRO ClearCut.
Wipe down with CARPRO Eraser (vehicle must be 100% dry and free of moisture or dew).
Drag two lines of product across length of suede wrapped applicator.
Apply evenly across surface, approximately 2 ft x 2 ft section at a time. (Any overlap from one section to the next must be within a couple minutes for even application).
Add more product to applicator as needed to keep a wet, even application.
GLISS will flash fast and when a white haze forms, immediately wipe off all residues using a microfiber towel. If haze is left on too long then reapply and immediately wipe off.
If layering on top of itself, wait 1 hour between coats. If IR cured, you may repeat immediately.
Total cure time: 6 hours

As a Top Coat
May be applied 4 hours or longer after CQuartz.
If IR cured may be applied after 45 minutes from CQuartz application.

After-Care Tips:
Keep surface dry for at least one hour after application.
Wipe any water off the surface during the first 24 hours after application.
Avoid detergents and chemicals for 5-7 days after application.
If it is dry and the air is clean outside then you may park the vehicle in direct sun after application is complete to hasten cure.
To maintain wash regularly with CARPRO Reset or Ech2o.