BLACKFIRE Poly Clay Bar - Aggressive Grade
Aggressive grade detailing clay is perfect for older vehicles or for removing paint over spray!
The perfect jaw-dropping shine starts with clean, smooth paint. BLACKFIRE Poly Clay II is an advanced synthetic detailing clay bar that deep cleans the paint and creates a perfectly smooth surface ready for polishing, glazing, sealing, or waxing. BLACKFIRE Poly Clay II works on all paint finishes, including clear coats. It is easy to work with and leaves almost no residue on the surface of the vehicle. Poly Clay II does not dry out with age and does not decompose with repeated applications. BLACKFIRE Poly Clay II leaves auto paint feeling slick, clean, and silky.
BLACKFIRE Poly Clay II removes what day to day driving puts into your vehicle’s paint. If you drive your car, it is going to collect paint contamination. There is no wax or paint sealant that can fully protect against contamination from rail dust, brake dust and environmental fallout. Most paint contamination consists of tiny metallic particles from brake pad linings and rail dust created from the friction of train wheels against railroad tracks. These hot, metallic particles fill the air on highways and near railroad tracks where they ultimately land on your car's finish, burning through any wax or sealant coating and embedding themselves in the top paint or clear coat layer. Contaminants can be felt as a "rough or gritty" texture on the paint's finish.
BLACKFIRE Poly Clay II works with BLACKFIRE Clay Lubricant to remove embedded paint contamination and leave paint silky smooth.
Less severe paint contamination consists of overspray, tree sap mist and industrial pollution. If left untreated, embedded contamination can cause tiny rust spots in your car's finish that can spread, ultimately causing paint failure!
Traditionally, the only way to remove this contamination was to compound or abrade away the top layer of paint or clear coat. Obviously, this could only be done a limited number of times as there was always the risk of removing too much paint. Detailing clay is the safer solution!
BLACKFIRE Poly Clay II is the latest in clay technology. It is the most recent innovation of the original detailing clay bars developed in Japan in the 1990s. It works by pulling contamination off the surface. It is not abrasive and does not remove the top paint layer.
BLACKFIRE Poly Clay II is an entirely man-made detailing clay bar and it has a number of advantages over traditional clays:
- Extremely flexible and easy to fold
- Durable and long-lasting synthetic clay
- Will not dry out or deteriorate
- Can be used on paint, wheels, glass, and metal. (Use separate pieces of clay for each surface.)
Only detailing clay can make your vehicle feel silky smooth without polishing. Use BLACKFIRE Poly Clay twice a year to enjoy the slickness and shine that comes from being truly clean.
One 4 oz. bar of Poly Clay II will clean up to 10 cars.
Caution: Use only as directed and with an approved lubricant such as BLACKFIRE Clay Lubricant to reduce friction between the Poly Clay II bar and the vehicle's surface. Reciprocate or glide Poly Clay along the lubricated surface until finish is smooth and contaminants are removed. When used as directed in the conventional method of polishing, contaminants can be removed from the surface without causing swirls.
Mist a small area (2 sq. ft.) of the vehicle with BLACKFIRE Clay Lubricant and rub the clay bar over the surface. The clay will "grab" at first. Continue lightly rubbing the clay over the surface until it moves freely. When the bar moves freely, the surface is clean. Wipe off any residues with a microfiber towel and proceed to the next area.
If clay residues resist easy wipe-off, re-mist the cleaned area with Clay Lubricant and wipe with a clean microfiber towel. Even stubborn residues will wipe off easily.