We will meet or beat anyone's pricing, shipping or promo!
Home > 3M Perfect-It EX Machine Polish

3M Perfect-It EX Machine Polish

3M Perfect-It EX Machine PolishA machine polish that perfects a swirl free shine

The 3M Perfect-It EX Machine Polish is a high performing machine polish for removing pesky swirl marks after compounding. As a result, 3M Perfect-It EX Machine Polish leaves your surface with a refined, polished finish. Application time and strength is enhanced with 3M Perfect-It EX Machine Polish as it produces a longer wet time and holds better on polishing pads for extra benefits. 3M Perfect-It EX Machine Polish allow for a faster detailing job at less cost!

Using a machine polisher is the fastest way to give your car a fresh, glossy look. Using a machine polisher is much faster than using your natural elbow grease, but there are certain negatives when it comes to going mechanical. Lingering swirl marks and high sling effects come out of using a machine. However, the 3M Perfect-It EX Machine Polish gives you a swirl free, high gloss finish with less sling! Plus, with a longer wet time, you get more product per use.

No one wants to see swirl marks after a few long hours of detailing! Swirl marks are actually tiny scratch that are commonly caused by using the incorrect pads on a polisher, harsh cleaners, using dirty towels, going through automated car washes and not washing your car properly. 3M Perfect-It EX Machine Polish gets rid of any remaining swirl marks, even though you are using a polisher. This is thanks aluminum oxide, an integral part in 3M Perfect-It EX Machine Polish. Aluminum oxide is a mineral abrasive used in many of 3M’s top performing abrasives discs and sheets. These abrasives cut quickly and uniformly in a very fine grade to remove swirl marks and tiny sand scratches.

More wet time and less sling, what could be more efficient? Never before has these two contrasting benefits been found in our product! The 3M Perfect-It EX Machine Polish stays wet longer on the surface, meaning you don’t have to keep reapplying it. 3M Perfect-It EX Machine Polish also holds better on the pad, which reduces mess, waste and cleanup time that is normally associated with sling. Sling can sometimes cause uncalled for damage to other parts of your car by inflecting product not conducive to that area.

Saving time, money and product is crucial for any detailer. By using 3M Perfect-It EX Machine Polish, you save time from having to constantly reapply the product to your polishing pad. Saving time is extremely useful if you have multiple clients, working on a time crunch or you are working in hot atmosphere. 3M Perfect-It EX Machine Polish saves you product due to the face that it stays wet on your pad longer, so you don’t have to continuously apply product. This saves you money in the long from having to buy multiple bottles of the same product.

Apply 3M Perfect-It EX Machine Polish using your preferred polishing pad and machine polisher.
- Working in a 2’ x 2’ area, use cross-hatch section passes to apply product evenly across the section.
- During the buffing process, use a medium pressure.
- For optimal results, only use light pressure for the last 2 section passes.
- Use a clean and dry microfiber towel to buff away excess product.
- Continue working in 2” x 2” sections until the entire paint surface is completed.

32 oz.


You May Also be Interested In These...