303 SiO2 Touchless Sealant 32 oz

Simple spray and rinse away!

303 SiO2 Touchless Sealant is an easy-to-use protection product that will allow you to receive the same protection you would expect from a wax in a fraction of the time! The most attractive feature of 303 Touchless Sealant is its fast and simple spray-on-rinse-off application process. The fact that you don't have to touch your car's paint with anything in order to apply 303 Touchless Sealant greatly cuts down on the risk of ruining your paint's impeccable finish. 303 Touchless Sealant will give you durable protection that not only rivals, but also exceeds what you can expect from a traditional wax!

Taking proper care of your car is a very time-consuming and difficult effort. There are so many different aspects of car detailing that it can be incredibly tough to allot the time necessary to do them all. One of the most important and lengthy processes in car detailing is the application of a protective wax or sealant. This process can take an entire day to do properly and needs to be done frequently enough to make your dread doing it as often as you must. So, instead of giving up in frustration, let 303 Touchless Sealant make your life a whole lot easier!

303 Touchless Sealant was formulated using a special blend of SiO2 that allows it to bond much quicker and easier than most SiO2 products you see on the market. 303 Touchless Sealant is water-activated and does not require any buffing in, buffing off, or curing to work properly. This unique functionality of 303 Touchless Sealant allows it to be applied in a fraction of the time it would take to apply a traditional wax or sealant. All you need to do is spray 303 Touchless Sealant on your wet car after you wash it and then rinse it away with water!

Simply Spray 303 Touchless Sealant on,	Then you rinse,
And you'll get water beading just like this!

Those of you with soft paint will particularly appreciate the touchless application of 303 Touchless Sealant. Whenever you are required to touch your car's paint, you are running a serious risk of instilling scratches and swirls in it, especially if you have soft paint. The only way to avoid this risk is to avoid touching your paint entirely. Because 303 Touchless Sealant is applied with a simple spray-on, rinse-off application, the only thing that will touch your paint while applying protection is a jet of water!

Even though it does boast quite an easy application process, 303 Touchless Sealant does not slack on the quality of protection to achieve that! 303 Touchless Sealant is outstandingly long-lasting and can even last up to twice as long as a traditional wax. On top of that, the level of hydrophobicity that it provides to your paint will ensure that you never have to worry about water spots, dirt, or loose contamination again!

Directions:
Prior to applying 303 Touchless Sealant, wash your car thoroughly outside of direct sunlight to ensure the car's surface is cool to the touch. Then, while the car is still wet and cool, work section by section and spray a light mist of 303 Touchless Sealant directly onto the surface. Immediately rinse the section with a strong jet of water. You will notice the water-beading begin to take effect immediately. If you use too much product or if you let it dry, it may cause water spots or streaking. If this happens, simply rinse the car thoroughly again and dry it off!

32 oz.