We will meet or beat anyone's pricing, shipping or promo!
Home > Lake Country 1-Pad Kit

Lake Country 1-Pad Kit

Test drive the Lake Country 1-Pad System!

The Lake Country 1-Pad Kit is a money-saving introduction to this revolutionary pad system. With 1-Pads, you use a fresh buffing pad every time so you don't have to worry about stiff foam or product residue from the last use. Once you try the 1-Pad system, you'll see why one pad per detail is a cleaner, better way to buff.

Conventional buffing pads require cleaning after every use and they eventually wear out. After the first use, the pad will never perform like new again. Cleaning pads takes time but if you neglect this important job, you risk cross-contaminating the vehicle. The 1-Pad Polishing System is the single-use solution!

The backing plate sits inside the pad.
The Tri-Density Backing Plate is made of three layers of flexible material that
provides cushioning and the ability to bend against curved panels.

The 1-Pad Polishing System consists of an ultra flexible, patented Tri-Density Backing Plate and a variety of bowl-shaped foam pads. The backing plate has a curved bottom that sits inside of the bowl-shaped 1-Pad buffing pads. The Tri-Density Backing Plate is very flexible. The cushioned backing plate is made almost entirely of flexible materials. When you transition from a flat surface to a vertical surface with your buffer, the Tri-Density Backing Plate flexes so the pad can maintain contact with the paint. Since the backing plate and pads are curved, there are no blunt edges to dig into the paint. For today's curvy vehicle styles, the 1-Pad Polishing System is a safer way to buff.


Go from flat to vertical surfaces with ease with the 1-Pad System.

Each 1-Pad uses 65% less material than most conventional foam pads. However, the system still provides plenty of cushioning. The Tri-Density Backing Plate is cushioned to provide the soft support needed, and it won't break down because the backing plate is not in direct contact with the paint.

Lake Country 1-Pads virtually center themselves! The rounded Tri-Density Backing Plate fits perfectly in each bowl-shaped pad. Hook and loop fasteners hold the pad in place. The full radius design allows you to buff safely over entire pad surface as well as buff safely on the edge of the pad. You can't do that with flat buffing pads!

The bowl shape of  the pad allows the backing plate to sit inside of it, where it is perfectly centered.
The Tri-Density Backing Plate sits inside the 1-Pad. You can polish with the entire pad, including the edges.

Use the Lake Country 1-Pad Polishing System with your professional rotary polisher.

The Lake Country 1-Pad Polishing System offers many pad options. The foam pads feature CCS (Collapsed Cell Structure) technology to evenly distribute polish over the working surface of the pad and reduce product waste.

The Lake Country 1-Pad Kit consists of:

Tri-Density Backing Plate Tri-Density Rotary Backing Plate, 6 inches - This ultra flexible, cushioned backing plate makes it easy to transition from flat to vertical panels. You've never seen a backing plate bend like this one. The Tri-Density Backing Plate is specially designed to provide added cushioning to 1-Pads. It centers itself perfectly in each bowl-shaped 1-Pad.
Orange light cutting 1-pad 1-Pad Orange Light Cutting Foam Pad, 7 inches - The orange pad is made of firm, high density foam for scratch and defect removal. Use this pad with polishes and swirl removers. It’s a multi-purpose pad that will work on most light to moderate imperfections.
white polishing foam 1-pad 1-Pad White Polishing Foam Pad, 7 inches - The white pad is designed for the application of micro-fine polishes and cleaner waxes. This pad has very light cutting power so it is perfect for pre-wax cleaners.
Black Finishing Foam 1-Pad 1-Pad Black Finishing Foam Pad, 7 inches - The gray pad's composition is firm enough to withstand added pressure during final finishing to remove buffer swirls. It has no cut and will apply thin, even coats of waxes, sealants, and glazes.

Benefits & Features of the 1-Pad Polishing System:

  • Patented Tri-Density Flexible Backing Plate
  • Form fitting pads are self-centering. Simply align, press and buff!
  • Tri-density cushion backing plate maintains consistent cushion feel, won’t break down with use like conventional pads.
  • Full radius design allows user to buff safely over entire pad surface as well as buff safely on edge.
  • 1-Pad use 65% less material than most conventional buffing pads.
  • Pad shape allows easy transition from flat to vertical surfaces.
Kit includes:
1 Tri-Density Backing Plate
1 Orange 1-Pad
1 Black 1-Pad
1 White 1-Pad

A total retail value of $63.98. Save $19.99!

Lake Country 1-Pad Kit

Sale Price: $43.99You Save $19.99 (31%)
Item ID: LC-1Pad-KIT
Retail Value: $63.98
Availability: Out Of Stock
Please provide your email and we will send notification when product will be available
Your email:Notify
Bookmark and Share

You Might Like...

DP Polishing Pad Rejuventor
Our Price: $19.99
2 Reviews

Review Summary
1 Reviews
100% (1)
0% (0)
0% (0)
0% (0)
0% (0)
0% Recommend this product (0 of 1 responses)
Won me over
The Lake Country 1-Pad System won me over. At first I was very skeptical, it appeared flimsy, not well thought out with the thinness of the pads, too small in diameter and too lightweight for the task it performs. After a few moments with this system, I was hooked. The pads are very durable; the edge design lets you work in close and with the interchangeable pads, and you don’t have to worry about spurring. Don’t misunderstand my wool bonnets will be in storage for that next super heavy cut, whenever that may be.

See a multiple product review here.