CARPRO Gliss 2.0 30 ml

CQUARTZ Gliss 2.0 is the next-generation hydrophobic topcoat designed for car enthusiasts who demand superior protection, durability, and a flawless finish. Building on the success of the original, Gliss 2.0 takes smoothness and slickness to the next level by extending its toughness and durability as well as its ease of use! Gliss 2.0 creates a mirror-like surface that repels water, oils, and contaminants more effectively than ever before. With its advanced hydrophobic formula, this topcoat provides extreme slickness, ensuring that water and contaminants bead off the surface effortlessly, keeping your car cleaner for longer and easier to maintain.

1. Wash and decontaminate the surface thoroughly.
2. Wipe down with CARPRO Eraser (vehicle must be 100% dry and free of moisture).
3. Drag two lines of product across length of suede wrapped applicator.
4. Apply evenly across surface, approximately 2 ft x 2 ft section at a time. Any overlap from one section to the next must be within a couple minutes for even application.
5. Add more product to applicator as needed to keep a wet, even application.
6. Allow to flash for 2 ~ 15 minutes depending on climate. 5 ~ 10 minutes is most typical.  
7. Look for it to dry to haze and then wipe off with CARPRO 2-Face towel before it becomes difficult. Wipe off all haze and residue to avoid any high spots.
8. If haze is left on too long, then reapply and immediately wipe off.
9. If layering on top of itself, wait 1 hour between coats. If IR cured, you may repeat immediately. 

Directions:

(For use as a top coat)

1. Wait 4 hours if applying on top of CQUARTZ or DQUARTZ. 
2. If the base coating is IR cured then Gliss 2.0 may be applied after it cools.