Pinnacle Black Label Diamond Ceramic Coating PRO 50 mL

Ceramic protection that shines bright (and is as hard) as a diamond!

Pinnacle Black Label Diamond Ceramic Coating PRO is a 9H rated professional paint coating. The Pinnacle Black Label Diamond Ceramic Coating PRO provides a high gloss shine, water sheeting action, long-lasting results and a protection period of up to four years. Pinnacle Black Label Diamond Ceramic Coating PRO minimizes the damaging effects of chemical staining, UV rays, oxidation and more on coated surfaces.

After spending hours washing, decontaminating, polishing and compounding your vehicle, why not take the extra step and complete the full detailing process by applying a ceramic coating application? A ceramic coating like Pinnacle Black Label Diamond Ceramic Coating PRO will make your car look glossier and stay protected longer.

Pinnacle Black Label Diamond Ceramic Coating PRO is rated a 9H for professional coating. This level of coating refers to the level of hardness once it has cured on the surface. It is actually based on the pencil scale of hardness, where technically you could drag a 9H rated pencil across the surface at a 45-degree angle and not leave a mark. But instead of breaking out your pencil collection, just trust us on this one that Pinnacle Black Label Diamond Ceramic Coating PRO will leave your surface as hard as a diamond. With this product your surface will more resistant and less likely to get swirls and scratches.

Place a few drops of Pinnacle Black Label Diamond Ceramic Coating PRO onto a microfiber applicator in a straight line.		Working in a 2' x 2' section, apply Pinnacle Black Label Diamond Ceramic Coating PRO by rubbing the applicator first left to right and then top to bottom to ensure total surface coverage.

	After Pinnacle Black Label Diamond Ceramic Coating PRO has "flashed", use a clean and dry microfiber towel to gently buff any excess product off the surface, leaving a glossy finish behind!

Not only will Pinnacle Black Label Diamond Ceramic Coating PRO give your car a diamond-like coating, but it gives off an ultimate high gloss shine. This high gloss shine looks great, but your freshly coated surfaces will also sheet water. Water sheeting will also prevent water from sticking to your surface, thereby eliminating the potential for water spots.

Pinnacle Black Label Diamond Ceramic Coating PRO has a protection period that can last up to four years. This protection protects against the damaging effects of chemical staining, UV rays and oxidation. Save time and energy by only having to apply this protect ever so often for long-lasting, swoon worthy results.

DIRECTIONS:
-Work on a cool surface, out of direct sunlight.
-If necessary, correct and polish paint to remove surface imperfections before applying.
-After washing and drying vehicle, use Pinnacle Black Label Diamond Surface Prep Spray to remove any leftover oils from washing/paint correction.
-Apply 3-4 droplets of coating to a foam coating applicator and wipe onto the surface.
-Allow a moment for product to flash before wiping excess product away.
-Continue around entirety of vehicle until all painted surfaces have been coated.
-Allow to cure approximately 12-14 hours and do not expose to moisture in that time.

50 ml.

 Federal regulations prohibit the shipment of this products by air, 3 Day, 2 Day, or US Mail. This item is shipped by Ground only. Sorry but no APO or FPO addresses.