GTechniq G-Wash 500 ml.
Wash away dirt, not paint protection!
Gtechniq W1 G-Wash has been specifically formulated to work in harmony with Gtechniqs range of protective coatings. This high foaming car wash breaks the bond between the dirt particles and your vehicles paintwork and lubricates particles, thereby enabling the safest possible removal of traffic film.
Gtechniq W1 G-Wash should be used as a maintenance auto shampoo. While highly effective, it is safe on all auto surfaces and will not strip waxes, sealants, or coatings.
Used in conjunction with Gtechniqs coatings, G-Wash will ensure maximum gloss retention.
Prior to washing, remove loose dirt and contaminants from your vehicle by rinsing with a hose or jet wash.
For light dirt, use 2 caps per bucket and 4 caps for heavy dirt.
Always begin washing the upper surfaces and work your way down, rinsing your wash mitt in a separate bucket of water as you go to release dirt. Then replenish your mitt in a second bucket containing your dilution of water and G-Wash. Brake dust is highly abrasive so ideally use another mitt for cleaning your wheels. Ensure that you never press hard to remove dirt (for stubborn dirt, allow to soak for several minutes) and always rinse your car thoroughly to remove all soap residues. Never apply detergents directly to bodywork or your sponge.
Gently dry your car with a Guzzler Waffle Weave Microfiber Towel.
You Might Like...
Directions for mixing are lacking. They tell you to put so many cap fulls in the water but not how much water. I use a automotive paint measuring cup by PPG to measure the amount of soap I put in a wash bucket. I used to use to much soap. Would be nice to know the actual ratio it should be.
I have been using 4 cap fulls to 3 gallons. Seems to make good suds and clean well
Suggest wearing gloves when using product as it will dry your hand out.