Lightning strikes more than once when it comes to shiny tires!

DP Lightning Shine Tire Spray is the spark you need for rich, dark shining tires. DP Lightning Shine Tire Spray is a one step, spray on application that doesn’t even require any wiping. Easy-to-use, DP Lightning Shine Tire Spray doesn’t sling, dry to the touch and provides a long-lasting shine.

Not all detailing projects need to take hours, some are as easy as spraying and walking away. But just because they are easy to do, doesn’t mean they should be taken as any less long-lasting and good looking. Just take DP Lightning Shine Tire Spray for example.

What you can expect:
• SHINE! A rich dark shine or a stain shine depending on your taste.
• QUICK! Literally spray and walk away!
• SAVE! Save time, money and energy with this quick and easy tire spray.

DP Lightning Shine Tire Spray provides your rubber, vinyl and tires with the ultimate level of shine. But not just any shine, a rich, dark shine, only designed for tires. Your tires will look as good as new and ready to roll. Plus, this rich, dark shine provided by DP Lightning Shine Tire Spray is long-lasting! Not only that, but DP Lightning Shine Tire Spray don’t sling and even dries to the touch.

---

Start off with a clean tire by using DP Dual Action Tire & Wheel Cleaner and a tire cleaning brush like the Speed Master Tire Scrub Brush. Give DP Lightning Shine Tire Spray a good shake and hold it about 6 inches away from the tire. Spray an even coat around the whole circumference of the tire. That's it! You can now walk away and admire the low shine finish of your tires! If you did want a high-gloss finish, wait about 15 minutes and then repeat the process until you get your desired level of shine!

---

The one step, spray and walk away application of DP Lightning Shine Tire Spray is one of the reasons its so great to use. This spray-on formula doesn’t require any additional wiping upon application, which not only means less work for you, but also saves you time and money from having to purchase additional tools. Because it dries to the touch, you won’t even need a microfiber towel! However, you will need that microfiber towel if you are going for a more satin look, because you will need to wipe the product away immediately for that effect.

DIRECTIONS:
-For best results, first clean the tires using DP Dual Action Tire & Wheel Cleaner and dry thoroughly.
-Shake well before use.
-Hold the can approximately 6-8 inches away from the tire’s surface and spray in a uniform manner.
-Allow to dry for 10-15 minutes.
-Wipe any overspray off immediately.
-Repeat if desired for maximum shine.
-If a more satin look is desired, spray onto the surface and immediately wipe away with a microfiber towel.

13 oz. can

Federal regulations prohibit the shipment of aerosol products by air. This item is shipped by UPS Ground only.