CarPro Ceriglass Kit
CarPro CeriGlass is a special glass polish developed from the innovative optical polishing compound, Cerium Oxide. This remarkable formula removes hard water spots that are attached on the glass like scales! Your vehicle's windshield and windows will have like-new clarity and smoothness after polishing with CeriGlass. The Ceriglass Kit includes 150 ml. Ceriglass, one foam applicators, and a microfiber towel.
Formulated with mild abrasives, CeriGlass deep cleans and polishes all glass surfaces with ease. It quickly removes acid rain spots, hard water spots, road film, stubborn bird stains, and interior glass film. CeriGlass is so effective, it even removes fine to medium scratches from glass! It leaves glass crystal clear and sparkling.
Use Ceriglass by hand or machine. Hand polishing is effective at removing mild water spots. If you want to remove widespread, severe water spots or light scratches, work with a rotary or orbital polisher and a glass buffing pad. When used with an orbital buffer, this polish can remove surface scratches from glass that are caused by salt and road dust that binds to your windshield wipers.
CeriGlass contains no strong dissolving agents, which can damage your skin. CeriGlass is a mild abrasive polish proven to work on glass without distortion. It can also be used to clean and brighten chrome and other metals and to polish hard plastics.
Before you give up on your scratched, spotted glass, use Ceriglass.
- Will not distort glass.
- Great for restoring old windshields.
- Can also be used to clean and brighten chrome and other metal surfaces.
- For hand or machine use.
- Not for use on aftermarket window tint, painted or coated glass.
- Great for polishing Plexiglas and restoring headlights.
- Removes tiny pinhole pits in glass windows and polishes away fine wiper scratches.
How To Use :
For best results, apply in the shade on cool glass.
We recommend using face mask while using a polishing machine to prevent inhalation of polish powder.
- Shake the bottle well.
- Apply small amount on the glass polish pad or a hand applicator.
- Cover the car panels and rubber seals with nylon film to protect them from powder dust.
- Buff thoroughly over the entire glass surface in a circular motion.
- Rinse the surface with water. Wipe off with microfiber towel and check your work. If necessary, repeat the process.
Always try CeriGlass on a small test spot to be sure it does not mar or scratch the surface.Kit includes:
150 ml. Ceriglass
1 foam applicator
1 microfiber towel
Items you might need
You May Also be Interested In These...
I broke the windshield into 6 sections & spent about 20 minutes on each section. (took about 2 hours).
The glass needs to be kept wet. I used distilled water in a spray bottle.
I'm very pleased with the results. The windshield looks new.
I masked off the car because the process can get messy. I learned quickly that you don't take the pad off of the glass while the polisher in running. (Stuff goes everywhere)
What I found is that the product is easy to apply but a little tougher to et off. I may have spread it too far and will cut back the next time I try it. Once off I saw that the glass looked very clear and had less scratches. When I got it out in the daylight however,I saw that there were still quite a few light scratches left. After a rain storm in the area it seems that I am somewhat back to where I startedlike the product was just filling inthe scratches.
My plan is to try it again maybe a couple more times to see if gets better. The first time I did it all by hand. The next time will be with an orbital polisher.