The polish you want for a metallic shine

After detailing your car to near perfection, all that’s left is to shine up the metal portions. BLACKFIRE Metal Polish restores metal to its original finish and leaves the area haze free. Oxygen is impossible to resist, but with the BLACKFIRE Metal Polish, you can quickly remove the lingering effects of oxidization. Rust, corrosion, fine scratches and other defects are no match for the BLACKFIRE Metal Polish, which is safe to use on aluminum, chrome and stainless-steel finishes. This product is easy to use and leaves your metal surfaces shining with brilliance.



Metal polishing can be a rough job. Sometimes just by looking at the metal parts of your car you wonder if it’s even possible to rid yourself of the rust and corrosion. Will the metal ever gleam again? Not to mention, the metal areas tend to be in uncomfortable places that you almost don’t want to bother with. But with the triple action power of BLACKFIRE Metal Polish, you’ll wonder why you didn’t use this product from the start. If it weren’t obvious enough, oxygen is all around us. So, unless you are keeping your vehicle in outer space, your car will eventually suffer for oxidization. Sunlight is also a factor in oxidization. Oxidization is harmful to your car cosmetically, fading and dulling the paint, trim and metals. The heavy-duty power of the BLACKFIRE Metal Polish fights the effects oxidation, restoring your vehicle’s metal surfaces to its original glory. The powerfully formulated chemicals of BLACKFIRE Metal Polish also liberate your metal surfaces of corrosion and fine scratches.



Your car, motorcycle, trailer or whatever metal you have that needs polishing, is in good hands when it comes to using the BLACKFIRE Metal Polish. This product is VOC-compliant, so it is safe for you and the environment, but is still tough on metal. This metal polish can be used on aluminum, chrome and stainless steel. When it comes to shine, stainless steel tends to be the hardest to brighten up. The BLACKFIRE Metal Polish is uniquely designed to make stainless steel shine, while at the same time defends chrome against rust and oxidization off aluminum. All your metal surfaces with have a facet of the BLACKFIRE Metal Polish at its defense. Some polishes tend to leave a hazy, ghostly finish. With the BLACKFIRE Metal Polish, you don’t have to worry about having a cloudy result after spending a good deal of time thinking you were buffing the area clear. This process is all done without the use of heavy solvents! Get ready for metal so clear, your reflection shines through!



One of the best factors about BLACKFIRE Metal Polish is how easy it is to use and how little product you need to see results. To use, all you need is to apply the product to a foam or microfiber applicator (by hand or machine) and work onto the metal surface. Wait till you see a little haze before wiping off the polish. A little goes a long way with this metal polish, all you need is a pea-sized amount bring your metals back to life. Saving you product and money!

DIRECTIONS: BLACKFIRE Metal Polish can be used by hand or machine. Apply to cool surfaces, out of direct sunlight. Shake well before use.

For use by hand:

-Apply a pea-size drop of product onto a microfiber or foam applicator pad and work into the surface. -Allow to dry to a haze before buffing away with a clean microfiber towel.

For use by machine:

-Apply a pea-size amount of product to a foam polishing pad or wheel polishing tool (if applicable).
-Work into the surface using a slow speed and medium pressure. -Allow to haze before buffing away with a clean microfiber towel.
-Depending on severity of contamination, multiple applications may be required.

16 oz.