Meguiar's D170 Hyper Dressing 128 oz.

Meguiar's Hyper Dressing is the ultimate professional-grade, water-based dressing engineered for versatility and control, allowing you to achieve any desired level of shine on non-painted rubber, plastic, and vinyl surfaces. This hyper-concentrate dilutes up to a generous 4:1 ratio, providing phenomenal value and a fully customizable finish that ranges from a dramatic, wet-look high gloss to a clean, more subtle satin glow. Perfect for both your vehicle's interior and exterior, the easy-to-use formula not only delivers maximum protection and shine but is also water-safe and leaves behind a pleasant scent.

The most notable feature of Meguiar's Hyper Dressing is its incredible 4:1 dilution ratio capability, which puts you in complete control of the final look. A straight, undiluted application will produce the highest, most dramatic wet-look gloss—ideal for exterior tires and engine plastics. Diluting the product 1:1, 2:1, or 4:1 allows you to fine-tune the gloss to a subtle, factory-fresh satin finish, which is often preferred for interior vinyl and dashboard surfaces. This single product replaces multiple dedicated dressings, making it a staple for both professional detailers and serious enthusiasts.

Designed for comprehensive detailing, Hyper Dressing is safe and effective on almost any non-painted surface across your vehicle. Its versatile formula can be used on tires and wheel wells to guard against dirt and road grime, on exterior trim and plastic moldings to restore a deep black appearance, and on interior door panels, dashboards, and vinyl seating to provide a clean, protected finish. Its water-based nature ensures it is safe for all these sensitive materials, and the convenient application process is as simple as spraying it on and wiping away any excess.

Unlike some solvent-based dressings that can damage plastic or sling off tires, this formula is purely water-based, ensuring it is a safe choice for all treated materials. This gentle chemistry prevents the drying and cracking often associated with harsh chemicals, providing long-term conditioning and UV protection. The formula is non-greasy and dries quickly to the touch, preventing dust accumulation, and it carries a light, pleasant scent that leaves the treated areas smelling as fresh as they look.

Directions for use:

Preparation & Application

• For Cleaning: Use a dedicated cleaner like P&S Brake Buster Non-Acid Wheel Cleaner (for tires/wheel wells) or P&S Xpress Interior Cleaner (for interior trim).

• For Dilution: A CARPRO Dilute Bottle or Meguiar's Generic Spray Bottle 32 oz. with a Chemical Resistant Trigger Sprayer is highly recommended for accurate mixing.

• For Application/Wiping: Use a Cobra Edgeless Microfiber Towel or a Speed Master Tire Dressing Applicator.

Step 1: Clean the Surface Thoroughly For best adhesion and maximum gloss, the surface must be completely clean.

• Tires/Exterior Trim: Spray the surface with your dedicated exterior cleaner. Use a Speed Master Tire Scrub Brush to aggressively agitate the tire walls or a soft brush for trim. Rinse thoroughly with water and allow to fully dry.

• Interior Trim: Spray your interior cleaner onto a clean microfiber towel and wipe the surface to remove all dust, dirt, and oil residue.

Step 2: Dilute to Desired Shine Level Mix the Hyper Dressing concentrate in a designated spray bottle based on your desired final look:

• High Gloss/Wet Look (Tires, Engine): Use undiluted (1:1 with water) or dilute 1 part product to 1 part water (1:1).

• Medium Gloss (Exterior Trim, Wheel Wells): Dilute 2 parts water to 1 part product (2:1).

• Satin/Factory Finish (Interior Dashboards, Vinyl): Dilute 4 parts water to 1 part product (4:1).

Step 3: Apply the Product

• Spray On: Spray a light, even mist directly onto the non-painted rubber, plastic, or vinyl surface. Avoid spraying on painted or glass surfaces.

• Work In (Optional for Higher Gloss): For a deeper, more even high-gloss finish, use a Speed Master Tire Dressing Applicator or a dedicated foam applicator to lightly spread the product evenly across the surface.

Step 4: Wipe Off for Finish Control This is the critical final step for controlling your shine level and preventing product sling.

• For High/Medium Gloss: Allow the product to dwell for 5-10 minutes, then take a clean, dry Cobra Edgeless Microfiber Towel and lightly wipe the entire surface to remove any excess product. This ensures an even cure and prevents sling.

• For Satin Finish: Immediately after application, use a clean, dry Cobra Edgeless Microfiber Towel to wipe the surface completely dry. This will leave behind a protected, deep satin sheen.

Step 5: Allow to Cure Allow the product to dry completely before driving or re-exposing to water. For best results, a 15-30 minute cure time is recommended.