Hybrid Solutions Pro: Ceramic & Graphene Max Wax
Bring your graphene skills to the max!
Hybrid Solutions Pro Ceramic & Graphene Max Wax uses a unique blend of proprietary polymers, infused with graphene to become a high performing liquid wax. Hybrid Solutions Pro Ceramic & Graphene Max Wax provides depth of gloss, slickness, chemical resistance, water repellency and stain prevention. Hybrid Solutions Pro Ceramic & Graphene Max Wax provides UV protection.
Graphene is a is the lightest, strongest and thinnest material known to man. Believe it or not, but graphene is actually one hundred times stronger than steel and even conducts heat and electricity. Graphene can even be found in your pencils. So, if graphene is so great, why haven't you used a product that uses both that and ceramic properties?
Hybrid Solutions Pro Ceramic & Graphene Max Wax uses a blend of proprietary polymers and graphene that delivers a multitude of results thanks to the unique properties of each. It delivers gloss, slickness, chemical resistance, water repellency and stain prevention. Meaning not only will the car look great, but it will also allow for water beading so that contaminants and water won't stick to the surface and stain. Hybrid Solutions Pro Ceramic & Graphene Max Wax has a self-cleaning look, so you don’t have to worry about extreme upkeep. This is due in part to a low friction, high contact angle that the combination of graphene and ceramic wax imparts.
But because Hybrid Solutions Pro Ceramic & Graphene Max Wax has graphene in it, it brings the slickness to a new level because of its unique polymer formula. Hybrid Solutions Pro Ceramic & Graphene Max Wax also brings intense UV protection to the table, keeping your surfaces protected from the sun's dangerous rays. The graphene adds UV additives under 3000-6000 pounds of intense sheering force. This creates a uniquely specialized graphene, SiO2 and UV matrix in a thin but powerful shield, reducing heat on the surface of your paint.
DIRECTIONS:
-SHAKE WELL.
-Do not over-apply high active formula. For best performance, paint should be free of oxidation and surface contaminants.
-Wash your vehicle and rinse thoroughly.
-Clay and polish first if needed.
-Use HYBRID SOLUTIONS PRO 1 & DONE COMPOUND CORRECT & FINISH to remove paint imperfections before applying wax.
HAND APPLICATION:
-Apply 3 dime size drops to an applicator pad and spread product evenly over a 2 ft. x 2 ft. section in an overlapping circulation motion.
-Wait 2-3 minutes to allow product to dry and haze.
-Remove with a damp microfiber towel and finish by wiping with a soft, dry microfiber to reveal a high gloss shine.
MACHINE APPLICATION:
-Apply 4 dime sized drops evenly spaced onto a soft foam buffing pad.
-Apply to a 2 ft. x 2 ft. section and slowly spread product over the surface at a low setting.
-Wait 2-3 minutes to allow product to dry and haze. Remove with a damp microfiber towel and finish by wiping with a soft dry microfiber to reveal a high gloss shine.
14 oz.
Hybrid Solutions Pro Ceramic & Graphene Max Wax uses a unique blend of proprietary polymers, infused with graphene to become a high performing liquid wax. Hybrid Solutions Pro Ceramic & Graphene Max Wax provides depth of gloss, slickness, chemical resistance, water repellency and stain prevention. Hybrid Solutions Pro Ceramic & Graphene Max Wax provides UV protection.
Graphene is a is the lightest, strongest and thinnest material known to man. Believe it or not, but graphene is actually one hundred times stronger than steel and even conducts heat and electricity. Graphene can even be found in your pencils. So, if graphene is so great, why haven't you used a product that uses both that and ceramic properties?
Hybrid Solutions Pro Ceramic & Graphene Max Wax uses a blend of proprietary polymers and graphene that delivers a multitude of results thanks to the unique properties of each. It delivers gloss, slickness, chemical resistance, water repellency and stain prevention. Meaning not only will the car look great, but it will also allow for water beading so that contaminants and water won't stick to the surface and stain. Hybrid Solutions Pro Ceramic & Graphene Max Wax has a self-cleaning look, so you don’t have to worry about extreme upkeep. This is due in part to a low friction, high contact angle that the combination of graphene and ceramic wax imparts.
But because Hybrid Solutions Pro Ceramic & Graphene Max Wax has graphene in it, it brings the slickness to a new level because of its unique polymer formula. Hybrid Solutions Pro Ceramic & Graphene Max Wax also brings intense UV protection to the table, keeping your surfaces protected from the sun's dangerous rays. The graphene adds UV additives under 3000-6000 pounds of intense sheering force. This creates a uniquely specialized graphene, SiO2 and UV matrix in a thin but powerful shield, reducing heat on the surface of your paint.
DIRECTIONS:
-SHAKE WELL.
-Do not over-apply high active formula. For best performance, paint should be free of oxidation and surface contaminants.
-Wash your vehicle and rinse thoroughly.
-Clay and polish first if needed.
-Use HYBRID SOLUTIONS PRO 1 & DONE COMPOUND CORRECT & FINISH to remove paint imperfections before applying wax.
HAND APPLICATION:
-Apply 3 dime size drops to an applicator pad and spread product evenly over a 2 ft. x 2 ft. section in an overlapping circulation motion.
-Wait 2-3 minutes to allow product to dry and haze.
-Remove with a damp microfiber towel and finish by wiping with a soft, dry microfiber to reveal a high gloss shine.
MACHINE APPLICATION:
-Apply 4 dime sized drops evenly spaced onto a soft foam buffing pad.
-Apply to a 2 ft. x 2 ft. section and slowly spread product over the surface at a low setting.
-Wait 2-3 minutes to allow product to dry and haze. Remove with a damp microfiber towel and finish by wiping with a soft dry microfiber to reveal a high gloss shine.
14 oz.
You Might Like...
Our Price: $554.93
Sale price: $459.99
17 Reviews
Review Summary
4.5
8 Reviews
5
63% (5)
4
25% (2)
3
13% (1)
2
0% (0)
1
0% (0)
88% Recommend this product (7 of 8 responses)
By Jon
St Paul
Hybrid Solutions Max Wax
July 3, 2021
Used on black LS460. Followed all the directions and had a real difficult time getting the streaks to go away. It was frustrating to say the least. Seemed like way too much work for the end product.
All of the Hybrid Solutions I have tried leave streak marks on the surface.
Not a big fan yet
All of the Hybrid Solutions I have tried leave streak marks on the surface.
Not a big fan yet
ConsLeave streaks no matter what you do
By shawn r.
NEW JERSEY
Best Sealant for Price Hands Down
June 29, 2021
Besides being super easy to apply and remove, it has the best durability of any sealant I can remember using. For the price and ease of use, it gives alot of coatings a run for the money.
Turtle wax has come along way the past few years.
Turtle wax has come along way the past few years.
ProsCheap
Easy application
Great gloss/slickness
Amazing chemical resistance
ConsNone
By Ann
,
Somewhat easy application but is hazy on a black car
April 3, 2021
I applied this to parts of my car that had already used a one step sealant (Griot) and the roof where I just used a synthetic clay sponge to prep-no sealant. I was surprised that when I removed the Turtle graphene liquid wax over the roof with no additional product underneath, that there was a bunch of greasy "smear" (black paint) that I had to keep going over with a soft rag to blend. The rest of the panels with sealant already applied was the same. It was a lot of work for a liquid wax. I left it on not too long, and within the recommended time. The end result the next day is a mirror like shine, smooth as glass. But its definitely wasn't easy on or off, on black paint at least.
By Steven
Columbia, MD
Great product
March 23, 2021
The finish matches all the hype and video reviews that I have read and watched over the past month.Its easy to apply and the shine was brilliant, I applied a second coat the next day and the shine seemed to be even deeper. Looking forward to seeing how long it lasts over the coming months.
ProsEasy to work with and great deep shine
ConsNone as yet
By Roger
Brook Park, Ohio
Slickness and Gloss
March 9, 2021
Even though I coat my cars with G-Techniq's CSL I still top them to have a sacrificial layer and to keep that "just coated" look. I've used C2V3 and Reload which are okay products but after hearing about how Turtle Wax upped their game in the Hybrid line I gave the new Max and Flex a try. I must say this is next level performance. The slickness and gloss are phenomenally better than other product I've used as toppers. The Max is definitely a must for the base coat then the Flex can be used as more like a detail spray after washes to keep that "like new" look.
ProsNext level slickness and gloss
ConsSpending your dough but the products are worth it.