Home > Car Care Products > Rubber & Vinyl > Exterior Trim > Forever Black Bumper & Trim Reconditioner (Dye) Quart
Forever Black Bumper & Trim Reconditioner (Dye) Quart
Bring back the richness of black trim and molding permanently with Forever Black!
Forever Black Bumper & Trim Reconditioner is available in a 32 oz. size! If you have a vehicle with a lot of dark trim and molding, the quart size ensures that you’ll have enough on hand to instantly restore the rich color. At only 1.25 an ounce, the Forever Black quart is a great value! Here’s why so many drivers prefer Forever Black:
Permanent Results. Forever Black permanently dyes black plastic, rubber, and vinyl. Wax build up can be stubborn to remove, and damage caused by UV rays yield bleaching and spotting. Use Forever Black dye to cover these problem areas. There is no oily residue and drying time is 5-20 minutes. Buffing is not necessary.
Versatile. Forever Black can be used on bumpers, spoilers, mud guards, door handles, and body and trim moldings. Black details will look rich and deep after applying this product.
Protects Against UV Rays. UV exposure can cause damage and long term problems if it is not reversed and corrected. Forever Black Dye protects trim from harmful UV rays, and permanently reverses and prevents fading.
To apply Forever Black, use a disposable foam applicator. This is a dye so you may be unable to remove it from the applicator. Thoroughly clean trim and moldings with a grease-cutting soap or cleaner in order to remove any oil or existing dressings. (Dish soap works well.) Dry the surface well. Tape off any area where you do not wish to apply Forever Black. Spread a thin, even coat over the surface. It takes 5-20 minutes to dry. Apply a second coat for richer luster.
Please Note: Forever Black is intended for porous, textured black plastic, vinyl, and rubber surfaces. It will streak on nonporous materials.
The Forever Black Bumper & Trim Reconditioner Quart contains enough dye to rejuvenate the trim and moldings on approximately 30-32 vehicles. Restore the rich, black color to your vehicle’s trim with Forever Black!
32 oz.
Forever Black Bumper & Trim Reconditioner is available in a 32 oz. size! If you have a vehicle with a lot of dark trim and molding, the quart size ensures that you’ll have enough on hand to instantly restore the rich color. At only 1.25 an ounce, the Forever Black quart is a great value! Here’s why so many drivers prefer Forever Black:
Permanent Results. Forever Black permanently dyes black plastic, rubber, and vinyl. Wax build up can be stubborn to remove, and damage caused by UV rays yield bleaching and spotting. Use Forever Black dye to cover these problem areas. There is no oily residue and drying time is 5-20 minutes. Buffing is not necessary.

Protects Against UV Rays. UV exposure can cause damage and long term problems if it is not reversed and corrected. Forever Black Dye protects trim from harmful UV rays, and permanently reverses and prevents fading.
To apply Forever Black, use a disposable foam applicator. This is a dye so you may be unable to remove it from the applicator. Thoroughly clean trim and moldings with a grease-cutting soap or cleaner in order to remove any oil or existing dressings. (Dish soap works well.) Dry the surface well. Tape off any area where you do not wish to apply Forever Black. Spread a thin, even coat over the surface. It takes 5-20 minutes to dry. Apply a second coat for richer luster.
Please Note: Forever Black is intended for porous, textured black plastic, vinyl, and rubber surfaces. It will streak on nonporous materials.
The Forever Black Bumper & Trim Reconditioner Quart contains enough dye to rejuvenate the trim and moldings on approximately 30-32 vehicles. Restore the rich, black color to your vehicle’s trim with Forever Black!
32 oz.
You Might Like...
Review Summary
4.0
4 Reviews
5
25% (1)
4
50% (2)
3
25% (1)
2
0% (0)
1
0% (0)
25% Recommend this product (1 of 4 responses)
By Eric
RINGGOLD, GA
Works well
May 19, 2020
Great for dyeing faded plastics. A little goes a long way and it's cheap for the number of cars you can do. Goes on easy but 2 coats is a must otherwise I have always had minor streaking or light spots.
ProsCheap for quantity
Easy to use
Rich dark black look
No run off with wash/rain; it's a dye
ConsNeeds to be put in an applicator btl
Little thin tends to want to run off brush
By Surprised
This stuff works great!
July 5, 2013
4 out of 5 stars because It's really messy and it's time consuming, However if you're patient & use a small sponge paint brush with the applicator (gloves & lots of paper towels suggested) the out come is excellent! I found it took many, many coats to ensure smooth quality without streaks or color inconsistencies. It dries & sets quickly. A heavy rain about 30 mins into my application didn't seem to bother the outcome much. As for quanity, 1 bottle/kit did not cover my whole xterrra. Ended up having to order more with truck only 1/2 done. But all and all...well worth it! It's a head turner!
By shaun
doesn't work on crv
May 16, 2011
I love forever black! it's so awesome on tires. But read carefully for the trim and bumper restoration kit. It does say " Please Note: Forever Black is intended for porous, textured black plastic, vinyl, and rubber surfaces. It will streak on nonporous materials.
It did not work on my plastic trim, it streaked and chipped badly after a couple weeks! So I instead just bought a spray paint which is 100% better! But fb is awesome on my tires and textured surfaces!
It did not work on my plastic trim, it streaked and chipped badly after a couple weeks! So I instead just bought a spray paint which is 100% better! But fb is awesome on my tires and textured surfaces!
By jason
forever black
September 6, 2009
i work at car dealership. we get chevy trucks in that people have hit the fender flares with wax or a buffing pad. forever black is great for fixing them.