A professional nanocoating system!
The Dr. Beasley's Nano Resin MX Kit is a professional nanocoating system that is meant for glossy paint. Dr. Beasley's Nano Resin MX Kit is a protective coating system graded for seven years of durability. The durability of Dr. Beasley's Nano Resin MX Kit provides paint with self-cleaning properties and improved micro-scratch resistance. Plus, Dr. Beasley's Nano Resin MX Kit leaves a long-lasting gloss and a deep finish.
Dr. Beasley's Nano Resin MX Kit actives a high-water repellency, making your surfaces hydrophobic. This hydrophobic surface reduces water spots by pushing the water off once it is wet. Plus, a hydrophobic surface is a self-cleaning surface. When the slippery surface takes the water, it also takes the grime and gunk along with it as well. This way, most of the time, all your car needs is a quick rinse.
Once your surface is all cleaned with hydrophobicity in play, your true surface will reveal itself. The surface when used with Dr. 's Nano Resin MX Kit promotes incredible, mirror-like gloss. It has a candy-like finish, bringing the gloss to a radiant level.
The Dr. Beasley's Nano Resin MX Kit itself includes all the tools you would need to create the perfect application. You will get the Nano-Resin MX, a Paint Coating Builder, a Foam Block Applicator and two Suede Cloths. Plus, with Dr. Beasley's Nano Resin MX Kit being rated for seven years of durability (with regular maintenance), you won’t have to go shopping for a second kit any time soon!
-Before applying Nano-Resin MX, paint must be prepped. Clay and polish your paint with a light compound and a random orbital machine buffer. If your paint is heavily scratched, paintwork correction may be required.
-Remove any residual matter from polishing using a panel wipe.
-Spray Paint Coating Builder onto a panel or small area. Wrapping the suede cloth around the foam block applicator, spread the Paint Coating Builder in vertical overlapping lines down the panel, followed by horizontal overlapping lines.
-Let sit 2-3 minutes, then remove with a microfiber towel. Repeat steps 3-4 until all desired paint surfaces are coated.
-Wrap a new suede cloth around the foam block applicator and use the included pipette to apply a line of Nano-Resin MX down the center of the cloth.
-Start by applying Nano-Resin MX in vertical lines down the panel. After you've covered your panel with vertical lines, go back and repeat with horizontal lines. This crosshatching will ensure full coverage. Avoid getting the product in panel gaps.
-Let the product sit on the surface for 30 seconds to a minute. Wipe panel with a clean, dry, microfiber towel.
-Repeat steps 5-6 on each panel until your entire vehicle is protected. Reapply several drops of Nano-Resin MX to your applicator every few panels or as needed.
-Allow coating to cure undisturbed for one hour. After, if product is left over, re-apply to high impact areas.