Foamaster Foam Gun - Quart

Enjoy a safer, sudsier wash with the Foamaster Foam Gun!

The Foamaster Foam Wash Gun is an essential tool for achieving a swirl-free car wash, delivering a thick layer of foam to provide maximum lubrication for your vehicle's paint. With brass fittings and a durable red and black nozzle, the Foamaster reduces the need for excessive scrubbing by pre-soaking the vehicle in rich, frothy foam, making dirt and debris easier to remove with minimal agitation. This technique helps prevent micro-marring and ensures a gentle, safe wash. The Foamaster is known for creating a substantial amount of foam that clings to the vehicle longer than soap applied by hand, thanks to its higher dilution ratio. Many detailers use the Foamaster both as a pre-soak and during the wash, spraying foam directly in the path of a mitt for optimal lubrication. Constructed from high-quality materials like brass and chemical-resistant polyethylene, the Foamaster is designed for durability and long-lasting performance, making it a favorite among detailers and car enthusiasts.

The Foamaster is available in two sizes:

75QCFMR – Quart Foam Gun w/ multi-ratio stem and deflector.
75HGFMR – Half Gallon Foam Gun w/ multi-ratio stem and deflector.

Multi-ratio Stem - The multi-ratio stem gives you five settings so you can adjust the dilution ratio of your shampoo. The chart below shows you the shampoo (oz.) to water (gal.) ratio based on the position of the stem.

Deflector - This piece can be used instead of the foam nozzle to deflect exiting water downward and into a wider path. This piece is best suited for spraying non-foaming cleaners over a broad area.

Features

• Accurately mixes and sprays foaming chemicals
• Foam generating wand creates a thick, clinging foam
• Detach handle for a powerful spray rinse
• For cleaning, degreasing or disinfecting when a foam is desired to increase surface contact time
• Easy to fill wide mouth, chemical resistant polyethylene quart or half gallon bottle
• Built-in screen filters out sediment before it reaches your vehicle

*If you are going to use the Foamaster on your vehicle, use it exclusively for your vehicle to avoid cross contamination.

Operational Specifications

Water Pressure - 40 to 90 psi (for maximum accuracy 40 to 60 psi)

Output - 1-1/2 gallons per minute

Spray Pattern - Foaming attachment provides a fan spray, removes for a solid stream. Deflectors are available for fan spray patterns for non-foaming chemicals.

Anti-siphon - Protects water supply by preventing soapy water from siphoning back into the hose. (Note: a slight discharge of water from base of handle when water is turned off is normal and indicates anti-siphon is functioning properly.)

Customized Ratios - Can be set from 1oz. per gallon to 12 oz. per gallon. (Note: this range is affected by the viscosity of the chemical.)

After each use, rinse the nozzle and foaming mechanism with clean water to remove any soap residue. This will prevent soapy build-up inside the nozzle and on the brass mechanisms. With regular cleaning, the Foamaster will give you years of trouble-free performance.

The Foamaster Foam Wash Gun has the features you want and the durable construction you need. Protect your vehicle from micro-marring and wash-induced scratches with the Foamaster!