||230 Volt FLEX XC3401 VRG Orbital Polisher Variable Speed
The orbital rotation of the FLEX Polisher simulates the circular movement of
the human hand while polishing. This motion is less likely to cause
holograms than a rotary buffer. At the same time, the polisher's highly
smooth running facilitates a careful, precise finish and allows for
hologram-free polishing. The positive drive ensures a uniform movement, even
under load, thanks to constant lift. Taken in conjunction with the large
stroke length the FLEX can remove existing holograms from black finishes.
The large stroke length refers to the size of the orbit. On many dual action
polishers, this is a very small distance and therefore you feel a jiggling
motion. On the FLEX polisher, the stroke length is 8 mm, a huge distance in
terms of orbital polishers! The FLEX Dual-Action Polisher has a true dual
action motion that reduces vibration. The FLEX Orbital Polisher’s smooth
acceleration and uniform, controlled motion make this DA machine ideal for
novices and pros alike. The FLEX XC3401 dual action polisher comes with a 5.5
Inch Hook & Loop Backing Plate and a 1 year manufacturer warranty.
||12 oz. XMT Fine Swirl Remover #2
Pinnacle XMT Fine Swirl Remover is a blend of mild abrasives and
lubricating oils that remove light to moderate imperfections on aging paint
finishes. If your vehicle is not new but has no severe paint damage, this is
the swirl remover for you. It removes light to moderate imperfections like
swirls, mild scratches, and light oxidation without reducing surface gloss.
You will not need a finishing polish.
||12 oz. XMT Ultra Fine Swirl Remover #1
This polish is made with such small abrasives that you can’t see them with
the naked eye. The sheer number and minute size of the abrasive particles
blend away fine flaws in the clear coat without leaving any trace of surface
marring or haze. Just like a fine jeweler’s rouge, XMT’s Concentrated
Micro Abrasives leave the paint finish glossy and smooth, just like new.
XMT Ultra Fine Swirl Remover is for like-new paint that is just starting to
show signs of age. It can also be used as a finishing polish.
||12 oz. XMT Carnauba Finishing Glaze
The gentle cleaners blend away minor flaws - like spider webbing, haziness,
and overall dullness – to increase depth and clarity. At the same time, a
layer of carnauba bonds to the paint surface to further enhance the dynamic
shine created by the glaze. What can’t be removed with the cleaners is
filled in with carnauba to create a smooth, flawless finish. It’s
perfection and protection in one! Use XMT Carnauba Finishing
Glaze as the finale to your detailing process. To increase depth and
brilliance, top the glaze with Pinnacle Signature Series II.
||1 CCS Orange 6.5 Inch Light Cutting Pad
Firm, high density foam for scratch and defect removal. Use this pad with
polishes and swirl removers. It’s an all around pad that will work on most
light to moderate imperfections.
||1 CCS White 6.5 inch Polishing Pad
This high absorption foam formula is intended for the application of waxes,
micro-fine polishes and sealants. This pad has very light cutting power so
it’s perfect for pre-wax cleaners.
||2 CCS Gray 6.5 Inch Finishing Foam
Least abrasive. Composition is firm enough to withstand added pressure
during final finishing to remove buffer swirls. Use with machine glaze or
finishing polish. Ultra-soft and incredible for a putting on that finishing
||2 Microfiber Towels (16 x 16 inches)
These microfiber towels are spun from an 80/20 polyester/polyamide blend,
producing a highly refined microfiber. The microscopic polyester/polyamide
fibers are split with a unique process that creates a “feathered” weave on
one side for buffing and looped fibers on the other side, which are
excellent for cleaning. This superior “feather” weave results in far greater
absorption properties in a virtually lint free network of fibers.
||1 Polish ‘N Wax Applicator
This two-sided applicator is an excellent tool for cutting in close around
trim and mirrors, places that your polisher can’t go. The foam applicator
has gray finishing foam on one side and orange light cutting foam on the
||12 oz. Pinnacle XMT Polishing Foam Pad Cleaner
Pinnacle XMT Polishing Pad Cleaner contains a degreasing agent that breaks
up oil and eliminates every last trace of residue. Soap (as in dish soap)
can leave a residue of its own, so there is no soap in this cleaner. Intense
cleaners and degreasers break up oily deposits left by car care products so
the pad rinses completely clean. This pad cleaner is ready to use in a
convenient pump spray bottle.
||12 oz. Pinnacle XMT Polishing Foam Pad Conditioner
Prevention of dry buffing is as easy as misting an unused pad with Pinnacle
XMT Polishing Pad Conditioner. It only takes a couple of spritzes to prep
the pad for polishing. The rich lubricants instantly penetrate the pad,
softening and conditioning the material. Even if the pad has never been
used, it will glide across the paint like you’re halfway through the detail