AutoGeek Header

CarPro Ceramic Paint Protection Sampler Kit

 X
CarPro Ceramic Paint Protection Sampler Kit

Prepare your vehicle for a long-lasting, protective finish.

Take a test drive of the innovative CarPro line with the CarPro Ceramic Paint Protection Sampler Kit! This package contains two products designed to deep clean your vehicle's paint and two products that offer fantastic protection and shine. Use all four to create a smooth, glass-like shine on all types of paint. The CarPro Ceramic Paint Protection Sampler Kit includes a sample size of Cquartz Ceramic Quartz Paint Protection to try out.

The CarPro Ceramic Paint Protection Sampler Kit includes: 

CarPro Tar X Tar & Adhesive Remover 50 ml. <font color=red>SAMPLE</font>

50 ml. CarPro TarX Tar & Adhesive Remover
Tar X safely lifts grease, tar, asphalt, insects, tire marks, adhesives, traffic film. and any other stubborn contaminants. There are no harsh chemical solvents and nothing to harm your vehicle. When Tar X is applied generously, it glows on dark or black cars. The visibility makes it easy to remove all of Tar X when rinsing.

 

CarPro Cquartz Ceramic Quartz Paint Protection 10 ml. <font color=red>SAMPLE</font>

10 ml. CarPro Cquartz
CQuartz by CarPro is an anti-static, weather-resistant nano coating that shines and protects your vehicle like nothing else! CQuartz works on the molecular level to transform the surface. Once treated with CQuartz, your vehicle will repel water and contaminants, and it will maintain a clear, reflective, hard-as-nails shine. One application can last two years!

 

CarPro Reload Spray Sealant 50ml. <font color=red>SAMPLE</font>

50 ml. CarPro Reload Spray Sealant
Give your vehicle the durable glass-like protection of Reload Spray Sealant. It's a water-based, spray-on glass membrane coating so the finish is literally glassy smooth and reflective! Reload Spray Sealant repels dirt and water. Use it alone for up to two months of paint protection or as a booster over CQuartz.

 

CarPro Iron X Iron Remover 50ml. <font color=red>SAMPLE</font>

50 ml. CarPro Iron X
Iron X by CarPro is an acid-free, pH-balanced iron remover that decontaminates auto paint and wheels. Iron X prevents the spread of iron-related damage to protect your vehicle from paint system failure. Iron X is a clear solution in the bottle but it turns purple when it comes into contact with sintered iron particles.

 

1-Pinnacle Foam Wax Applicator1-Pinnacle Foam Wax Applicator

4 Poly Foam Applicators
The foam wax applicators can apply any wax evenly without creating any swirl marks. They are absorbent in order to catch drips or runs, and they apply perfect, even coats of paste waxes and polishes.

 

microfiber towels 2 Microfiber Detailing Towels, 16 x 16 inches
Use these microfiber detailing cloths for drying, buffing, or as a finishing wipe down. Microfiber is designed to be light, strong, super-absorbent and quick drying. The fibers are non-abrasive, and are woven so tightly that it’s absolutely lint free and extremely durable. Unbelievably, these ultra-tough fibers are engineered to absorb seven times their weight in moisture.

To use this kit, start with a clean vehicle. Apply Iron X over the vehicle and wipe it in with a damp sponge. Wait 5 minutes for Iron X to change color. Wipe it off with a damp sponge and then rinse off the entire vehicle. Dry the vehicle well.

Spray Tar X on dry surface. Let Tar X react on surface for 1~2 min. or brush/agitate with sponge pad (spray some TarX on the sponge as well). Rinse thoroughly with a power washer or flowing water. Dry the vehicle.

Next apply Cquartz with a microfiber applicator pad. Apply it in straight lines, criss-crossing each panel. Wait 20-30 min. average. At 20-30° C. (68-86° F), wait 10-15 min. At 10~20° C (50-67° F), wait 20~40 min. Then wipe off gently with a suede microfiber towel with short looped fibers. Avoid re-using the wipe off microfiber towels because they will harden and crystallize. Let dry for 1hour at 25° C (77° F) or 3 hours at 15° C (59° F). Do not wash the vehicle with soap for 7 days.

Once Cquartz is cured, you can use Reload to refresh and maintain the shine any time. Use the included microfiber detailing towels to buff off Reload.

Use the CarPro Ceramic Paint Protection Sampler Kit to deep clean your vehicle and prepare it for a glossy Cquartz finish.

 

CarPro Sample Kit includes:
50ml. Iron X Remover
50ml. TarX Remover
50 ml. Reload Spray Sealant
10ml. Cquartz Ceramic Quartz Paint Protection
4 Poly Foam Applicators
2 Microfiber Detailing Towels, 16 x 16 inches

A total retail value of $63.94, save $13.95!





CarPro Ceramic Paint Protection Sampler Kit
Item #: CP-100
Our Price: $63.94
Sale price: $49.99 - You Save $13.95 (22%)
Availability: Usually ships the same business day
Enter Quantity:




Related Items

Optimum Opti-Coat 2.0 Permanent Paint Coating <font color=red>FREE BONUS</font>
Optimum Opti-Coat 2.0 Permanent Paint Coating FREE BONUS

$79.99
CarPro Suede Microfiber Cloths 40 x 40 cm, 10 Pack
CarPro Suede Microfiber Cloths 40 x 40 cm, 10 Pack

$19.99
Klasse Super Size Kit
Klasse Super Size Kit

$69.99

Best Car wax, Auto Care Products, Auto Detailing Supplies,klasse car wax,Meguiars Car Wax,Mothers Car Wax.

Join The Autogeek.net Auto Detailing Forum - Autogeekonline.net
www.autogeek.net



CarPro Ceramic Paint Protection Sampler Kit
$49.99