Nanoskin Autoscrub System Start Up Kit – 6 inch
Complete kit includes Autoscrub System and Shock lubricant!
The Nanoskin Autoscrub System Start Up Kit includes everything you need to remove paint contaminants with your dual action polisher! The Nanoskin Autoscrub System is a fast, effective way to remove above surface paint contaminants with your dual action polisher. The Nanoskin Autoscrub System utilizes advanced rubber polymer technology to safely remove above surface paint contaminants like paint overspray and rail dust. This unique material is becoming widely used in the car care industry for paint decontamination, but Nanoskin has pioneered the machine application of this technology with the Autoscrub System. This kit includes Nanoskin Shock, the approved lubricant for use with the Autoscrub System along with a high quality microfiber towel!
Use the Autoscrub System with an approved lubricant, like Nanoskin Shock or Glide. Spray the face of the pad and the actual panel that you're going to be working on. Only work on one panel at a time.
Set the polisher on a low speed setting and move the polisher back and forth and then side to side. Do NOT apply any pressure to the polisher. Inspect the paint often using your hand placed in a plastic baggy. When the paint feels smooth, wipe off the lubricant and move on to the next section.
Most professional detailers and car care enthusiasts agree that claying is the most tedious step in detailing. It is messy, time consuming, and you don’t always achieve the smooth finish that you desire. Plus, if you drop a clay bar on the ground, you must discard it or you risk the chance of scratching or marring the finish. The Nanoskin Autoscrub System replaces detailing clay and the hassle that goes along with it by utilizing a machine-applied disk laminated with a high-tech rubber polymer face that effortlessly removes paint contaminants leaving you with a smooth finish that’s ready for polishing. Nanoskin Nano Shock Instant Lubricant Sealant ensures optimum performance from the Autoscrub system by providing just enough lubrication so scratching or marring doesn’t occur.
Like any other profession, time is money when it comes to production detailing. The sooner you finish a vehicle, the sooner you can get started on another one. The Nanoskin Autoscrub System practically eliminates paint decontamination which is one of the most time consuming, labor intensive steps. By utilizing the power of your dual action polisher, the Nanoskin Autoscrub System removes all types of paint contaminants including rail dust, paint over spray, industrial fall out, bugs and even tar. What’s more, it can even be used on glass, chrome, and exterior trim.
The Nanoskin Autoscrub System is so easy to use anyone can do it! Just because this system was designed for the professional doesn’t mean the beginner can’t take advantage of the many benefits it has to offer. Simply spray a liberal amount of the included Nanoskin Nano Shock Instant Lubricant Sealant on the surface and turn the polisher on with the Autoscrub System attached. Make a few passes over each area and then inspect your work. If you accidentally drop the Autoscrub System on the ground, simply rinse it off with water.
The Nanoskin Autoscrub System revolutionized paint decontamination and you’ll quickly appreciate its ease of use every time you use it.
Note: This is the MEDIUM GRADE version of the Autoscrub System. It is designed for vehicles with moderate to heavy contaminants. To achieve flawless paint when you’re finished using the Autoscrub System, we recommend following up with a fine polish like Pinnacle Advanced Finishing Polish and a polishing pad on your dual action polisher.
Autoscrub Medium Foam Pad – 6 inch
4 oz. Nano Shock Instant Lubricant Sealant
You May Also be Interested In These...
What used to take me about 1 to 1.5 hours to properly clay bar a vehicle, now takes me less than 30 minutes, with the identical results!
Excellent product if you want to save time, save money (easily washable and reusable), and maximize the time you spend on a detail job.
I had over spray on my custom 55 Ford and it took it all off and didn't harm the paint.