We will meet or beat anyone's pricing, shipping or promo!
Home > Shop By Brand > Menzerna Polishing Compounds > Menzerna Medium Cut Polish 2400 32 oz.

Menzerna Medium Cut Polish 2400 32 oz.

Menzerna Medium Cut Polish 2400 32 oz.

Our Price: $52.99
Item ID: MEN-PO83Q
Availability: Usually ships the same business day
Bookmark and Share
Note: Menzerna Medium Cut Polish 2400 is the new version of Menzerna Super Intensive SI-1500. Menzerna has changed the name and label, but it is the same product you know and love. It is currently only available to select U.S. retailers.

Concentrated abrasive action for today’s scratch-resistant, ceramic clear coats.

Menzerna Medium Cut Polish 2400 is designed for the removal of scratches, swirls, and oxidation on the scratch-resistant clear coats used by Mercedes Benz. Concentrated, specially milled abrasives remove 2000 grit sanding scratches to leave a brilliant shine with little or no hazing.

Note: Menzena Medium Cut Polish 2400 also goes by the part number Menzerna PO85RD 3.02 but it has been shortened to PO83 for simplicity by Menzerna USA, the US distribution office for Menzerna Polishes.

Menzena Medium Cut Polish 2400 PO85RD 3.02At the end of 2003, Mercedes Benz put into production a new scratch-resistant clear coat lacquer made up of nano-sized ceramic particles, which are baked and hardened in the paintshop oven, just like you’d bake pottery in a kiln. This process results in an extensively cross-linked, very hard paint finish that stands up better to mechanical car washes and day to day abuse. This clear coat, called CeramiClear from PPG, is the only nanotechnology clear coat used on Mercedes production lines and is approved for the repair of Mercedes and Nissans.

The problem with the ceramic clear coat is that it is harder to correct than the comparatively soft clear coats used by most other car manufacturers. Ceramic paint can still scratch; just not as easily. When a scratch does occur, not all the polishes on the market are capable of removing it from the new, hard-as-a-rock clear coats.

Menzerna Medium Cut Polish 2400 is formulated specifically for the new ceramic, scratch-resistant clear coats. Menzerna developed a new family of abrasives that are better able to penetrate the hard paint and level imperfections. Medium Cut Polish 2400 is the most aggressive of this new breed of polishes, capable of removing 2000 grit sanding scratches.

Though this is a powerful polish, Menzerna Medium Cut Polish 2400 produces virtually no dust or haze. The polish contains a high concentration of small abrasives, which allows the polish to work cleaner. The tiny abrasives blend away imperfections using consistent abrasive action, meaning the hundreds of abrasives are repeatedly passing over the blemish to gradually eliminate it. The results are smooth, glossy, haze-free paint.

On most paints, you can go straight from Menzerna Medium Cut Polish 2400 to finishing with a wax or sealant without any steps in between. It leaves such a deep gloss, there’s no need for a finishing polish in many cases.

Menzerna Medium Cut Polish 2400 finishes exceptionally well for the amount of cut it provides
Menzerna Medium Cut Polish 2400 can be used with a dual action or rotary polisher to remove defects quickly.
Note: Dark paints may require follow up with a finer polish. Use Menzerna Nano Polish, which is also formulated for scratch-resistant clear coats.

Menzerna Medium Cut Polish 2400 can be used on all types of paint, including conventional clear coats. Use it on fresh paint finishes (once fully cured) to eliminate any swirls or overspray. On older paint finishes, Menzerna Medium Cut Polish 2400 will remove moderate imperfections and refresh the color.

Menzerna Medium Cut Polish 2400 contains no silicone, waxes, fillers, or glaze. It’s a water-based pure polish, which makes it ideal for a body shop or paint shop environment.

In the final analysis, Menzerna Medium Cut Polish 2400 is a step beyond the average polish in terms of cutting ability but its clean, haze-free finish is definitely representative of a polish. Regardless of its classification, it’s the best choice for polishing and paint correction on today’s hard, ceramic clear coats.

Application by Machine:
  1. Make sure the surface to be compounded is clean and dry. Fresh paint should be fully cured. Apply Medium Cut Polish 2400 out of direct sunlight.
  2. Use a wool or foam polishing pad, such as Lake Country’s CCS White Polishing Pad or Orange Light Cutting Pad. The Orange or Green Edge 2000 Pads will also work well with Medium Cut Polish 2400. Apply a 6 inch line of compound to the vehicle. With the polisher turned off, spread the polish over about a 2 x 2 sq. ft. area.
  3. Polish at 1200-1800 RPM (5000-6000 OPM on a dual action polisher) working slowly across and then up and down the area. Check your work after several passes to see if the defect has been removed. If so, reduce the pressure and continue buffing until a high gloss is achieved. If the pad becomes dry, mist it with water and continue buffing.
  4. Wipe the area with a damp microfiber cloth.
  5. If necessary, follow with Menzerna Nano Polish to restore optimum gloss.
  6. Always apply a wax or sealant after compounding or polishing. We recommend Wolfgang Deep Gloss Paint Sealant 3.0 to seal in the shine with its long-lasting polymer formula.
If you're looking for a 16 oz. size of this polish, try Wolfgang Total Swirl Remover 3.0! It has the same cutting power and flawless results, in a smaller size.

32 oz. (1 Quart)

Items You Might Need

Menzerna Medium Cut Polish 2400 128 oz.
Our Price: $189.99
1 Review

You Might Like...

FLEX XC3401 VRG Orbital Polisher Intro Kit - Choose Your Pads!
Our Price:  $554.93
Sale price:  $499.99
17 Reviews
Porter Cable 7424XP & CCS Pad Kit - <font color=red>FREE BONUS</font>
Our Price:  $283.91
Sale price:  $259.99
58 Reviews
Wolfgang Total Swirl Remover <font color=red>3.0</font> 16 oz.
Our Price: $47.99
13 Reviews

Review Summary
12 Reviews
100% (12)
0% (0)
0% (0)
0% (0)
0% (0)
25% Recommend this product (3 of 12 responses)
Manassas, VA
Great Compounds once again by Menzerna
Being a professional detailer I've tried many compounds but Menzerna puts them all to shame. I use All of their compounds for certain paint corrections. Different polishes for different cuts. Hands down the best products you can have.
Delray Beach, FL
Excellent second step polish
I try to use the least aggressive product that does the job, since my vehicles are in good shape I only use this product when I find small imperfections or fine scratches, or as a second step after a rubbing compound if needed. works awesome.
ProsEasy to work with Easy to remove Removes fine scratches
ConsNeed smaller bottle 32oz is a total waste of product for my needs
Houston, TX
Good Stuff for Holograms
Use this to delete haze and holograms. Or after using medium strength compound Menzerna PG1000. This will leave a gloss enough that you can seal and wax, but I recommend going even one step finer with a jeweler's polish like Chemical Guys v38. Then it will look like glass.

Always use microfiber pads and avoid foam pads. Trust me, I have used both and there is not comparison.
ProsWorks well and can be sealed and waxed after use.
ConsNot made for hard or medium cutting.
I've been using SIP for many years and I have always loved this product. It corrects very well and when used with PO85RD it really leaves an amazing finish. SIP is always my go to polish because it corrects so well and is easy to use.
Looking for a Polish that corrects with great working time? Look no more, SIP is one of the best, removes scratches, swirl marks and leaves the paint looking super.