Home > Shop By Brand > Menzerna Polishing Compounds > Menzerna Porter Cable XP Intensive Shine Kit FREE BONUS
Menzerna Porter Cable XP Intensive Shine Kit FREE BONUS
For a limited time only, receive a BLACKFIRE Polish 2 oz. sample, a BLACKFIRE Compound 2 oz. sample, and 2 5.5" Red Soft Wax Pads with your purchase!
$17.96 Value!
Intensify the shine with Menzerna polishes!
The Menzerna Intensive Shine Kit is for moderate swirl removal and shine enhancement using your Porter Cable 7424XP dual action polisher. The Menzerna polishes included in this kit are the same polishes used by paint repair technicians to remove imperfections on newly cured paint to create a new car shine.
In the Menzerna Intro Kit we paired Menzerna PO 91E Intensive Polish and Menzerna Final Finish 3000, both formulated to remove flaws on fresh repair coatings and all types of paint, with or without a clear coat. Menzerna PO 91E Intensive Polish removes 2000 grit sanding scratches, swirls, and scratches on old and new paint finishes. Final Polish removes 2500 grit sanding scratches and light swirls on fresh paints and on vehicles prepolished with Intensive Polish. This two part system will create a gorgeous gloss that will absolutely glow under a coat of wax.
This kit includes Lake Country’s CCS Dual Action 6.5 inch Smart Pads™ Foam Pads. These flat full contact buffing pads work with your dual action polisher to correct automotive paint more easily than ever before. The CCS Smart Pads™’ user-friendly features provide better control, less product waste, and a more successful detail.
The Menzerna Intensive Shine Kit includes:
Application:
Work out of direct sunlight on a clean, dry vehicle.
Kit includes:
Porter Cable 7424XP Polisher
Porter Cable 7424XP Wrench
Porter Cable 7424XP Counter Weight
5” Backing Plate
32 oz. Menzerna Final Finish 3000
32 oz. Menzerna PO 91E Intensive Polish
2 Microfiber Detailing Cloths, 16 x 16 inches
4 - 6 Inch Microfiber Bonnets
1 CCS 6.5 Inch White Polishing Pad
1 CCS 6.5 Inch Black Finishing Pad
A total retail value of $300.84. Save $45.85!

$17.96 Value!
Intensify the shine with Menzerna polishes!
The Menzerna Intensive Shine Kit is for moderate swirl removal and shine enhancement using your Porter Cable 7424XP dual action polisher. The Menzerna polishes included in this kit are the same polishes used by paint repair technicians to remove imperfections on newly cured paint to create a new car shine.
In the Menzerna Intro Kit we paired Menzerna PO 91E Intensive Polish and Menzerna Final Finish 3000, both formulated to remove flaws on fresh repair coatings and all types of paint, with or without a clear coat. Menzerna PO 91E Intensive Polish removes 2000 grit sanding scratches, swirls, and scratches on old and new paint finishes. Final Polish removes 2500 grit sanding scratches and light swirls on fresh paints and on vehicles prepolished with Intensive Polish. This two part system will create a gorgeous gloss that will absolutely glow under a coat of wax.
This kit includes Lake Country’s CCS Dual Action 6.5 inch Smart Pads™ Foam Pads. These flat full contact buffing pads work with your dual action polisher to correct automotive paint more easily than ever before. The CCS Smart Pads™’ user-friendly features provide better control, less product waste, and a more successful detail.
The Menzerna Intensive Shine Kit includes:
Application:
Work out of direct sunlight on a clean, dry vehicle.
- Put the white pad onto your Porter Cable 7424. Apply an X of Menzerna PO 91E Intensive Polish across the pad. With the polisher turned off, spread the polish on a 2 x 2 sq. ft. section of paint. Note: Using the white pad with Menzerna PO 91E Intensive Polish will remove light to moderate imperfections. If you have more pronounced swirls, use an orange light cutting pad.
- Turn the polisher on between 5 and 6 and work the polish into the paint in a side to side, overlapping motion. When the polish begins to dry, turn the polisher off and lift it off the paint.
- Use one of the included Microfiber Polishing Cloths to wipe away the residue. You can also use a bonnet but you must place the bonnet over a lambswool pad (not included) to provide a cushion between the backing plate and the bonnet.
- Remove the white pad and put on the black pad. The black foam has no cut so using it with Menzerna Final Finish 3000 will give the paint a light, shine-enhancing polishing.
- Apply an X of Menzerna Final Finish 3000 across the black pad. With the polisher turned off, spread the polish on a 2 x 2 sq. ft. section of paint.
- Turn the polisher on between 4 and 5 and work the polish into the paint in a side to side, overlapping motion. When the polish begins to dry, turn the polisher off and lift it off the paint.
- Use one of the included Microfiber Polishing Cloths to wipe away the residue. You can also use a bonnet but you must place the bonnet over a lambswool pad (not included) to provide a cushion between the backing plate and the bonnet.
- Always apply a wax or sealant after polishing.
Kit includes:
Porter Cable 7424XP Polisher
Porter Cable 7424XP Wrench
Porter Cable 7424XP Counter Weight
5” Backing Plate
32 oz. Menzerna Final Finish 3000
32 oz. Menzerna PO 91E Intensive Polish
2 Microfiber Detailing Cloths, 16 x 16 inches
4 - 6 Inch Microfiber Bonnets
1 CCS 6.5 Inch White Polishing Pad
1 CCS 6.5 Inch Black Finishing Pad
A total retail value of $300.84. Save $45.85!
|

Items You Might Need
Our Price: $12.99
3 Reviews
You Might Like...
Our Price: $298.93
Sale price: $254.99
2 Reviews