A cleaner for every reason!
Jescar All Purpose Cleaner is a universal cleaner that is specifically concentrated for the removal on harmful contaminants for different types of surfaces, both interior and exterior. Because it is concentrated formula you can use it many different ways and it can last longer. Jescar All Purpose Cleaner is an alkaline-based and solvent-free cleaner.
You have many different surfaces in and outside your car, and they all suffer against contaminants and the damage they cause. Just because you have many different types of surfaces, that doesn’t mean you should have to buy a new product for each and every surface. Save time, money and hassle and you use product for practically all your surfaces.
Surfaces get messy, everything from your paint and glass to engine bays. Jescar All Purpose Cleaner can remove everyday contaminants like insects and bird droppings from your surface, without harming the paint. Not only that, but this concentrated solution, when diluted correctly digs deep to break down grease from engine bays and even workshop floors. Plus, it can be used on glass and interiors.
Because Jescar All Purpose Cleaner is concentrated, dilution ratios will be your new best friend. For exterior cars, trucks and even RV’s dilute with 1:10 product to water. If the area in question needs a little more cutting power, like tackling grease, use the ratio 1:5. For interior cleaning, dilute from 1:10 to 1:20.
Jescar All Purpose Cleaner is an alkaline-based cleaner, meaning it has the strength to dissolve fats, oils and grease in a more effective manner than any other type of cleaner. However, this product is also solvent-free which means that it is safe for the environment and the surfaces you put it on. So, bottom line, you have a safe yet very powerful clean.
-For cleaning automotive, RV and truck exteriors, dilute with water 1:10.
-Apply APC to entire surface, allow to work for 1-2 minutes then thoroughly remove with power washer.
-For heavy grease cleaning dilute 1:5 then remove after a few minutes with a power washer.
-For interiors such as carpet and fabric, dilute 1:10 to 1:20 then after cleaning remove with a damp sponge or wet vac.
-Do not let dry on surface or work on hot surfaces.