Perfect black paint finishes!
Hybrid Solutions Ceramic Acrylic Black Polish is an all-in-one formula that is designed to correct, enhances and adds protection to black paint finishes. Thanks to the precision polishing of Hybrid Solutions Ceramic Acrylic Black Polish, you can remove scratches, swirls and other paint imperfections. Hybrid Solutions Ceramic Acrylic Black Polish uses both SiO2 and acrylic polymers to produce durable protection that repels water and more.
Black paint on cars can be unique. They take a certain extra car for waxes and polishes to really shine through, despite the dark color. You want a deep, rich, black shine, not a dull swirled up mess. It was hard to find a product that fulfilled all these needs, until Hybrid Solutions Ceramic Acrylic Black Polish.
Hybrid Solutions Ceramic Acrylic Black Polish is formulated with both ceramic SiO2 and acrylic polymers to produce a layer of protection that is durable enough to repel not only water, but also harsh chemicals. This allows the water to tighten up into tiny beads and roll off your surfaces, thus preventing permanent water stains for months at a time.
Black painted vehicles aren't the easiest to bring out their shine. Plus, they are very visible with their water spots, scratches, swirls, dirt and dust, as all those contaminants cling to the paint. But with the use of Hybrid Solutions Ceramic Acrylic Black Polish and its black pigmented polish and carnauba wax, light imperfections are filled and leaves a deep, rich black shine.
Hybrid Solutions Ceramic Acrylic Black Polish is the highest-grade solution for not only black, but dark blue and charcoal gray finishes. This polish is also easy-to-use, so matter if you are professional or a beginner, you can achieve a glossy and smooth finish. Not to mention some eye-popping shine.
-Wash your car with a heavy-duty car wash solution for the best product performance. Rinse and dry thoroughly before polishing.
-Shake bottle of Ceramic Acrylic Black Polish before use to evenly distribute polishing agents throughout the product.
-Place a dime-sized drop of car polish onto a foam application pad. Buff into the surface of your car to remove any and all scratches, scrapes and swirls. Avoid spreading product in the gaps between panels where it may get stuck and become difficult to remove.
-Allow product to dry until it transforms into a light haze. Then, wipe off polish with a clean microfiber cloth for a deep, lustrous finish.
-Wait 24 hours for ceramic coating to cure before following with other detailing products, such as the Hybrid Solutions Ceramic Wet Wax for a deep, reflective shine.
-We recommend an 8mm dual action flex buffer with a 5.5-inch pad to apply this product.
-Add four drops of polish to your cutting pad and use a low speed to smooth product evenly on exterior panels.
-Increase RPM while working your way up and down each panel to fully correct painted surfaces.