Rinse on, rinse off and refill!
GTechniq Marine Rinse On Ceramic Refill is the fast and simple way to protect your boat's glossy surfaces. With it's water repelling capabilities, GTechniq Marine Rinse On Ceramic Refill can easily be used to quicky wash your boat using a hose on protection.
When working on a boat, you don't always the time, space or energy to wash the normal way with a bucket, sponge and soapy product. Sometimes you need to be in out with just one product or tool. With GTechniq Marine Rinse On Ceramic Refill, as long as you have a hose, you are ready to go!
GTechniq Marine Rinse On Ceramic Refill is optically clear and non-yellowing, making sure that no matter what your surface stays glossy. Plus, GTechniq Marine Rinse On Ceramic Refill is also UV-repelling, so that even if your sun is out in the hot sun all day, your surface will remain protected. This is because the coating crosslinks to the any surface, including gelcoat, topcoat, glass, metal, ceramic and plexiglass. This product is also water repelling! You won't have to worry about water sticking to your boat's surfaces, causing ugly water marks. Not to mention, the protection when using GTechniq Marine Rinse On Ceramic Refill can last up to three months. You can even use GTechniq Marine Rinse On Ceramic Refill during every one of your wash downs.
GTechniq Marine Rinse On Ceramic Refill is used in tandem with a hose. To use, you will insert the hose attachment and just easily rinse down the surfaces. Then you get to use the knob in forward motion to enact the coating into the water feed. Once the surface as been fully coating, best to work in 10 x 10 foot surfaces, you can turn the knob back off and switch to normal water. Once fully washed, just dry with some microfiber towels. Prepare for gloss!
- Insert hose attachment, connect hose and then thoroughly rinse down all surfaces.
- Turn the forward knob to introduce the coating into the water feed.
- Apply to an area measuring no more than 10ft x 10ft (3m x 3m).
- Once all surfaces have been fully coated, turn the forward knob back to its original position and rinse down all surfaces thoroughly.
- When rinsed, dry with a Gtechniq Microfibre Drying Towel.