DP Ceramic Paint Sealant 12 oz

Not sure if you'll like it? See what Mike Phillips has to say about it HERE!

Super slick, super sleek sealant!

When looking for protection, gloss and an easy application, look no further than DP Ceramic Paint Sealant. DP Ceramic Paint Sealant is infused with SiO2 for not only gloss, but also slickness and hydrophobicity. Super easy to apply and remove, DP Ceramic Paint Sealant is even self-cleaning.

DP Ceramic Paint Sealant is formulated to create a layer of protection on treated surfaces. This protection will prevent against water spots, damage from UV rays, chemical stains and other pesky environmental contaminants. In addition, DP Ceramic Paint Sealant also prevents future potential contaminants from creating too strong a hold. This protection is increased with its SiO2 infused formula. This formula enacts gloss and slickness, making it look great, but it also promotes hydrophobicity.

What to expect:
• SELF-CLEANING! Makes washing your car even easier.
• HYDROPHOBICITY! Allows water to bead off to protect against water spots.
• THE LOOK! Prepare for a glossy and slick look.

This hydrophobicity allows water and the contaminants it carries to bead up and roll off the surface, rather than dwell and get etched into the surface in the form of water spots. While it cannot stop water stops from occurring altogether, it can help prevent them. Not only does DP Ceramic Paint Sealant promote water beading, but even better, it promotes water sheeting.

With its self-cleaning abilities, DP Ceramic Paint Sealant makes washing your car even easier. Not that you don't have to wash (we wish), but makes it less tasking. This self-cleaning ability basically means that all the contaminants, the mud, the grime, and what have you, will have a difficult time bonding to the surface. That way, contaminants will be removed with less effort.

DP Ceramic Paint Sealant is super easy-to-apply and to remove. Before applying, make sure the surface is newly washed and dried. Apply in the shade, by first use DP Coating Prep Spray to remove any oils that could cause improper bonding. Then with a foam or microfiber applicator, apply DP Ceramic Paint Sealant to the surface and wait twenty minutes. Finally, gently buff away with a clean microfiber towel.

DIRECTIONS:
-Shake well before use.
-Ensure surface is freshly washed, dried and cool to the touch.
-Do not apply in direct sunlight.
-Use DP Coating Prep Spray to remove any oils.
-Use a foam or microfiber applicator, apply DP Ceramic Paint Sealant onto the surface to be treated.
-Allow to cure for 20 minutes.
-Buff away with a clean microfiber towel.
-Continue around vehicle.

12 oz.

 Federal regulations prohibit the shipment of this products by air, 3 Day, 2 Day, or US Mail. This item is shipped by Ground only. Sorry but no APO or FPO addresses.