We will meet or beat anyone's pricing, shipping or promo!

Pinnacle XMT Intermediate Swirl Remover Intro Kit

Xtreme Machine Technology applied by hand!

Don’t have a polisher? No problem! The products in Pinnacle XMT Series are so advanced and so user-friendly, they will yield impressive results when applied by hand. The combination of Concentrated Micro-Abrasives and emollients allows XMT swirl removers to work effectively without creating the kind of hazing that often results from compounds. The abrasives found in XMT swirl removers are precisely milled to break down to a fine polish, even if your method of application doesn’t produce much heat.

The Pinnacle XMT Intermediate Swirl Remover Intro Kit gives you the power to remove moderate to severe swirls, moderate scratches, and oxidation, by hand. The fine abrasives in XMT swirl removers repair the problem areas without causing trauma to the paint. An included applicator makes it easy to achieve the results you want without a polisher.

The Pinnacle XMT Intermediate Swirl Remover Intro Kit includes:

12 oz. XMT Intermediate Swirl Remover #3
Precisely milled abrasives – and a lot of them – blend away moderate to severe blemishes without removing significant layers of clear coat. Since clear coats are extremely thin, these Concentrated Micro Abrasives preserve as much of the paint as possible while removing only the defect. The abrasives gradually diminish as they work, giving you a built-in finishing polish. The paint will experience little or no loss of surface gloss. Use XMT Intermediate Swirl Remover for all-over paint correction or as a spot treatment for problem areas.

Pinnacle XMT Ultra Fine Swirl Remover #1
This polish is made with such small abrasives that you can’t see them with the naked eye. The sheer number and minute size of the abrasive particles blend away fine flaws in the clear coat without leaving any trace of surface marring or haze. Just like a fine jeweler’s rouge, XMT’s Concentrated Micro Abrasives leave the paint finish glossy and smooth, just like new. XMT Ultra Fine Swirl Remover is for like-new paint that is just starting to show signs of age. It can also be used as a finishing polish.

Pinnacle XMT Carnauba Finishing Glaze
The gentle cleaners blend away minor flaws - like spider webbing, micro-marring, and overall dullness – to increase depth and clarity. At the same time, a layer of carnauba bonds to the paint surface to further enhance the dynamic shine created by the glaze. What can’t be removed with the cleaners is filled in with carnauba to create a smooth, flawless finish. It’s perfection and protection in one! Use XMT Carnauba Finishing Glaze as the finale to your detailing process. To increase depth and brilliance, top the glaze with Pinnacle Signature Series II or Souveran wax.

Polish ‘N Wax Applicator
This two-sided applicator is an excellent tool for cutting in close around trim and mirrors, places that your polisher can’t go. The foam applicator has gray finishing foam on one side and orange light cutting foam on the other. You get two applicators in one!

2 Deluxe Microfiber Applicators, 3.5 x 4.5 inches
These Deluxe Orange Microfiber Applicators are great for applying rubber and vinyl dressings, polishes, and cleaners to your vehicle’s most delicate surfaces. With over 200,000 strands of microfiber per square inch, these applicators will glide over paint, plastic, even glass – without scratching.

2 Microfiber Detailing Towels, 16 x 16 inches
Use these microfiber detailing cloths for drying, buffing, or as a finishing wipe down. Microfiber is designed to be light, strong, super-absorbent and quick drying. The fibers are non-abrasive, and are woven so tightly that it’s absolutely lint free and extremely durable. Unbelievably, these ultra-tough fibers are engineered to absorb seven times their weight in moisture.

Detail your way with the Pinnacle XMT Intermediate Swirl Remover Intro Kit. It contains all the products you need to restore your vehicle’s finish by hand.

Use the products as follows:
  1. Apply a quarter-size amount of Pinnacle XMT Intermediate Swirl Remover #3 to the orange side of the Polish ‘N Wax Applicator. Work the swirl remover into the paint one small section at a time. Use an overlapping, figure eight motion to ensure good coverage.
  2. Once the swirl remover dries to a haze, buff away the residue with the microfiber towel. Repeat these steps until you’ve polished the entire vehicle or all the problem areas.
  3. To enhance the shine and smoothness of the paint, apply a quarter size amount of XMT Ultra Fine Swirl Remover #1 using the gray side of the applicator. Apply and buff as directed above.
  4. Apply a quarter size amount of XMT Carnauba Finishing Glaze. Spread the glaze in a thin, even coat over one section at a time.
  5. After the glaze dries, buff off the haze with the second microfiber towel.
  6. For longer lasting protection, follow up with your favorite Pinnacle Wax.

Kit includes:
12 oz. XMT Intermediate Swirl Remover #3
12 oz. XMT Ultra Fine Swirl Remover #1
12 oz. XMT Carnauba Finishing Glaze
Polish ‘N Wax Applicator
2 Deluxe Microfiber Applicators, 3.5 x 4.5 inches
2 Microfiber Detailing Towels, 16 x 16 inches

A total retail value of $77.92, you save $17.93!

This kit is for hand application. For machine application, please see our money-saving XMT Intermediate Swirl Remover Complete Kit .

Pinnacle XMT Intermediate Swirl Remover Intro Kit

Item #:
Our Price:
Sale Price:
$59.99 - You Save $17.93 (23%)
Usually ships the same business day
Item Temporarily On Back Order
Please see items below that we suggest as alternatives
Bookmark and Share

You May Also be Interested In These...

Pinnacle XMT Porter Cable 7424XP <font color=blue>Heavy Duty</font> Swirl Remover Kit <font color=red>FREE SHIPPING</font>
Retail Value: $297.37
Our Price:  $199.99
(3 Reviews)
Microfiber Towel Combo
Retail Value $75.90
Our Price $49.99
(7 Reviews)
Autogeek Quart Foamaster Foam Gun
Our Price: $59.99
(51 Reviews)