Nanoskin Rain Plus Hydrophobic Glass Treatment is a two-part glass treatment system that is designed to protect your vehicle’s exterior glass for up to 18 months. Nanoskin Rain Plus Hydrophobic Glass Treatment is based on advanced hydrophobic polymer technology that blankets your exterior glass in a super slippery coating. This high-tech glass coating is resistant to UV rays, dirt, moisture and oil. It is designed to keep your windshield clean and protected – in any situation.
Not too long ago glass was one of the most overlooked aspects of car care and detailing. So long as the paint looked clean and shiny, all was well. With an ever increasing concern for safety it was only a matter of time before car care manufacturers introduced specially formulated glass treatments designed to repel dirt, moisture, oil, and - more importantly - rain, sleet and snow. Rain Plus Hydrophobic Glass Treatment System is Nanoskin’s entry into this growing segment and it exceeds expectations far and wide with its ease of use and outstanding durability of almost 18 months.
Nanoskin Rain Plus Hydrophobic Glass Treatment creates an immense amount of surface tension on exterior glass that causes water to bead up and roll off. This makes driving on the expressway during torrential rainstorms much safer as it enables you to see clearly. Nanoskin Rain Plus Hydrophobic Glass Treatment works so well you won’t have to use your windshield wipers as much!
Don’t let the name fool you – Nanoskin Rain Plus Hydrophobic Glass Treatment benefits those who live in the northern climates too. Treated glass will be so slick that sleet, snow and ice are effortlessly removed. The surface created by Nanoskin Rain Plus Hydrophobic Glass Treatment is so slick that a quick detail spray, like Nanoskin Smooth, is all that’s necessary to clean the glass in between washes.
Pour PART A into PART B and shake for 60 seconds.
Thoroughly clean the glass and dry surface before treatment.
Mist ACTIVATOR onto the surface evenly, and glide with the cleansing sponge back and forth to remove bonded contaminants.
Wipe off the ACTIVATOR with dry clean lint-free microfiber towel.
Mist PART A & B mixture onto the surface, and evenly spread the product.
Allow the product to cure for 15 minutes.
Wipe off the haze with a clean, dry lint-free microfiber towel
Note: The shelf life of PART A & B mixture is 24 hours.
4 oz. ACTIVATOR
15 ml RAIN PLUS PART A
15 ml RAIN PLUS PART B