|The professional choice for clean auto paint. |
The Finish Kare Paint Decontamination System is a three step system that deep cleans auto paint using a specific sequence of alkaline, acidic, and neutral cleaners. This system eliminates soil and ferrous metals from beneath the paint surface to prevent long-term paint damage. The Finish Kare Paint Decontamination System is factory authorized and manufacturer approved to deliver a clean, protected vehicle with a glassy smooth finish, while saving time and effort on the part of the detailer.
CAUTION: The Finish Kare Paint Decontamination System is for professional use only. This system contains an acidic cleaner. Protective goggles, gloves, and clothing should be worn, and a first aid kit should be available in case of accidental contact.
The Finish Kare Paint Decontamination System was developed as a method of removing paint contamination beyond what can be removed by washing or claying. If you are familiar with detail clay, you know it is capable of removing above surface contaminants that have bonded to the paint. The Finish Kare Paint Decontamination System is designed to remove what lies below the paint surface.
Airborne chemical compounds and ferrous particles - particles containing iron - actually penetrate the paint and create corrosive compounds that eat deep into the paint's sub-layers. This is a gradual process that often is not evident until it's too late. Claying or polishing only removes the particle, not it's effects, which are continuing to spread beneath the surface.
The Finish Kare Paint Decontamination System is a total solution to paint contamination. Steps 1-3 are specifically formulated to neutralize and remove contaminants to stop any damage being done to the paint and to prevent future damage. Step 4 Finish Kare 218 Poly Wipe Sealant or Finish Kare 2180 Ultra Poly Wipe Sealant seal the paint and forms a anti-static barrier to dust and industrial fallout.
The Finish Kare Paint Decontamination System removes:
- Vehicle wrap adhesives
- Industrial fallout
- Rail dust
- Acid rain
- Silicone and waxes
- Tar & road grime
- Tree Sap
- Love bugs & other insects
- Bird droppings
- Hard water spots
Note: Some decontamination procedures include the use of products containing Oxalic Acid. This acid softens the paint, exterior trim, and aluminum. Damage may not be evident for months. The Finish Kare Paint Decontamination System does not contain Oxalic Acid.
In addition, the system protects against the future effects of acid rain, hard water, industrial fallout, and ultraviolet radiation.
Here's how the Finish Kare Paint Decontamination System works:
Step 1: Finish Kare 1119 Soil and Coating Remover
Finish Kare 1119 Soil and Coating Remover is a fully biodegradable, alkaline based cleaner with inhibitors for safe usage. It removes outer surface rust, iron oxides, soil coatings, and vehicle wrap adhesives while cleaning and preparing the surface for step two. Dilute 1:4 with water.
Step 2: Finish Kare SIRR Steel, Iron Rust Remover
Finish Kare SIRR Steel, Iron Rust Remover is a blend of acids and inhibitors that actually opens the pores of the paint, allowing the ferrous particles to be removed by agitation. SIRR Steel, Iron Rust Remover will enter the subsurface of the paint film and neutralize caustic compounds generated by ferrous particles that have penetrated paint film. Use undiluted.
Step 3: Finish Kare 118 Shampoo Super Concentrate & pH Neutralizer
Finish Kare 118 Shampoo Super Concentrate & pH Neutralizer is a heavy-duty, highly active shampoo concentrate and non-clogging, non-hydrolyzing neutral soap system. When used with cold water, it quenches the paint surface, which pops ferrous particles up and out of the paint system. Because of its special blend of chemicals, this shampoo will also neutralize acid rain as well as acidic contamination below the paint surface. Dilute 1 oz. per gallon of water.
Always apply paint protection after using steps 1-3. Finish Kare 218 Poly Wipe Sealant Conditioner is formulated with amino functional polymer resins. These resins chemically create a cationic effect, which allows them to plate to the surface of the finish to form a protective web. This web of polymers allows the paint to breath and withstand temperatures in excess of 300 degrees. Finish Kare 218 does not contain any harmful silicones (i.e. dimethyl silicones). Finish Kare 218 has a moderate amount of cleaning ability.
Finish Kare 2180 Ultra Poly Wipe Sealant has all the advantages of 218, but with less cleaning ability and a little longer durability.
Both Finish Kare 218 Poly Wipe Sealant Conditioner and Finish Kare 2180 Ultra Poly Wipe Sealant have patented anti-static agents that eliminate the attraction of dust and industrial fallout, which is magnetically attracted to a vehicle. Both sealants are available separately.
The Finish Kare Paint Decontamination System is used by body shops for pre-cleaning prior to detailing and by dealerships for new and used car prep.
If you are a detailing professional looking for an effective solution to paint contamination, go with the proven science of the Finish Kare Paint Decontamination System.
64 oz. Finish Kare 1119 Soil and Coating Remover
31 oz. Finish Kare SIRR Steel, Iron Rust Remover
31 oz. Finish Kare 118 Shampoo Super Concentrate & pH Neutralizer
A total retail value of $55.97. Save $5.98!
|Federal regulations prohibit the shipment of this product by air.
This item is shipped by UPS Ground only.