Bonnets are a detailer’s best friend when it comes to buffing. Because fabric has more variation than the surface of a foam pad, individual fibers are able to lift and remove dried products better. Whether you are buffing the entire vehicle with your Cyclo Dual Head Polisher or buffing isolated areas with your electric drill, the Cyclo Bonnet Kit will be a great asset to your detailing arsenal.
4” Microfiber and Terry Bonnets are the perfect fit on the Cyclo pads. Use them on your Cyclo, or with your Porter Cable 7424 equipped with the 3.5 DA backing plate. You can even use these little bonnets on your electric drill by applying the a drill adapter, backing plate, and a 4” pad.
Your Cyclo Bonnet Kit includes:
6 - 4” Premium Terry Bonnets
Typically, waxes and polishes dry to a haze and then you buff it off. This haze can sometimes be difficult to remove by hand or with a microfiber bonnet. But its not a problem for the 4” Terry Bonnets. The looped cotton fibers gently whisk away dried wax and polish as you move your Cyclo polisher over the surface. If you think of the texture of a plush bath towel, you’ll have a pretty good idea what these bonnets feel like. That varied texture allows the terry bonnets to softly scrub the paint surface to remove the dried haze.
6 - 4” Premium Microfiber Bonnets 4” Microfiber Bonnets are ideal for final buffing because they attract dust better than terry cloth, or any other fabric for that matter! After removing wax or polish from your vehicle, there may be a light layer of dust left over from the haze created by the product. Slip two microfiber bonnets over the pads on your Cyclo polisher, and you can whisk away that dust while gently polishing your paint to a dazzling shine. Microfiber has a static charge that literally draws dust and lint into its network of fibers. Meanwhile, the Microfiber Bonnets will massage your paint to a bright shine.
2 Cyclo Premium White Finishing Pads 4 Inch
The white pad is Cyclo’s softest pad. It is intended for final buffing and wax application. It will render a glossy shine without polishing. This pad has no cut.
All 12 bonnets in this kit are washable and reversible! Use them to buff isolated areas or your whole vehicle. You’ll find countless uses for the Cyclo Bonnet Kit!
Wash your bonnets and pads using DP Polishing Pad Rejuvenator in a 5 gallon bucket. Mix one scoop with 3-4 gallons of water and allow your detailing tools to soak for up to 15 minutes. Agitate with a Foam Conditioning Brush. Rinse thoroughly and allow to air dry.