The Speedy Surface Prep Towel revolutionized paint decontamination by providing a more effective method of removing bonded contaminants on automotive paint. Production detailers demanded that manufacturers of car care products provide them with a more efficient way of removing bonded contaminants because time is money! When the Speedy Surface Prep Towel was originally introduced it exceeded expectations because it not only provided a faster means of removing bonded contaminants compared to the traditional clay bar, it was more effective too! If you thought the original Speedy Surface Prep Towel removed bonded contaminants in a hurry, wait until you try the new medium grade Speedy Surface Prep Towel!
The Speedy Surface Prep Towel is often referred to as the clay towel or clay bar towel but in actuality, the Speedy Surface Prep Towel has nothing in common with the traditional detailing clay bar. The Speedy Surface Prep Towel is a microfiber towel with a high-tech polymerized rubbing coating applied to one side. This polymerized rubber coating grabs above surface contaminants and pulls them away from the surface, leaving you with contaminant-free paint. The medium grade Speedy Surface Prep Towel utilizes a more aggressive polymerized rubbing coating making it ideal for heavily contaminated vehicles.
The Speedy Surface Prep Towel is far more cost effective than the traditional detailing clay bar which is only good for 10-20 uses. The Speedy Surface Prep Towel will provide up to 100 applications making it the obvious choice for professional detailers or production detailers. What’s more, the Speedy Surface Prep Towel is not sticky or messy and if you drop it on the ground don’t fret about throwing it away because all you have to do is rinse it off!
1. The Speedy Surface Prep Towel comes with a protective coating from the factory. Before using the towel, you must break it in. Saturate the towel with a clay lubricant and using no pressure, wipe the towel back and forth and then up and down on clean, lubricated glass, such as your windshield. After several passes, the protective coating will be removed and the Speedy Surface Prep Towel will be ready for use.
2. Fold the Speedy Surface Prep Towel four ways and work one panel at a time using a high quality clay lubricant. Spray the area and without applying any pressure, move the towel back and forth in one direction and then up and down in the other direction. Make sure that you are using a fast hand motion. Do not move the Speedy Surface Prep Towel in circles or go outside of your lubricated area.
3. After the Speedy Surface Prep Towel glides smoothly across the surface, flip it to another side and lightly go over the area once more.
4. Remove any excess lubricant and move on to the next section.
Note: If you drop the Speedy Surface Prep Towel on the ground, simply rinse it with water. Do not use harsh detergents to clean the Speedy Surface Prep Towel. A mild soap and water solution is all that’s needed.
Discover what professional detailers have been referring to as the “clay towel” and take your skills to the next level with the medium grade Speedy Surface Prep Towel!
The medium grade Speedy Surface Prep Towel is vehicles that are heavily contaminated. If your vehicle is well maintained or clayed on a regular basis, we recommend the fine grade Speedy Surface Prep Towel.