Chemical Guys V36 Optical Grade Cut Polish was developed to produce a perfect swirl free finish. It is an ultra refined cutting polish developed to achieve the finest level of optical clarity. V36 is powder-free, dust-free, and formulated for extended work time. V36 cutting polish is a water-based, OEM approved polish capable of removing moderate to heavy paint defects permanently, delivering perfect results without filling in or covering up.
Optical Grade micro abrasives rapidly eliminate imperfections and remove 2000-2500 grit sanding scratches, swirls and holograms. Chemical Guys V36 Optical Grade Cut Polish delivers a perfect finish with fewer passes and is equally effective on ceramic finishes and conventional clear coats.
Chemical Guys V36 Optical Grade Cut Polish delivers the finest results with unmatched optical clarity. Designed to function without oils, silicone or fillers, V36 maximizes efficiency by optimizing work time. It is VOC compliant and body-shop safe for any paint shop environment. V36 is specifically engineered to work with water-based paints and ceramic clear coats.
Engineered specifically for scratch-resistant and ceramic clear coats.
Extended work time.
Dynamic Finish Capabilities allowing the highest level of cutting power.
Removes 1500-2000 grit sanding scratches.
Designed for use with D/A and Rotary polishers.
OEM approved, water-based formula.
Optical grade micro abrasive technology for enhanced clarity and precision.
VOC Compliant and body shop safe.
Formulated using no silicone or fillers.
Work on cool surface. Shake Well. Always work 2’ x 2’ section at a time.
Apply 4-5 drops to desired pad. Prime pad with XMT Polishing Pad Conditioner. Spread polish onto paint at speed setting 1.
Set DA machine to speed setting 5-6.
Using moderate pressure, work area in 2-3 passes until compound becomes clear. Follow with light pressure to finish.
Remove residue with clean microfiber cloth.
Apply 4-5 drops to desired pad. Prime pad with XMT Polishing Pad Conditioner.
Set machine to between 1000-1500 rpm to spread product. Work in 2’ x 2’ section at a time. Using just the weight of the machine (no pressure), work area in 3-4 passes until compound becomes clear.
For final pass, adjust speed setting to between 1200-1800 rpm. Work until optical clarity is achieved.