|No spot or stain will remain!|
The Aztec Hot Rod Hot Water Extractor deep cleans carpet with the power of hot water. No spot or stain will remain! The Aztec Hot Water Extractor is designed with the pro detailer in mind. Quick heating, a lightweight, portable design, and extra long hoses make the Aztec a priceless addition to your detailing arsenal.
Most carpet soil left behind by a vacuum is bonded to the carpet by oil or grease. Oils and grease act like glue to hold soil in carpet and upholstery fibers. What can break these bonds? A blast of hot carpet cleaning solution makes these stains much easier to remove. Hot water cleans 8 times faster! That’s why you need the Aztec Hot Rod Hot Water Extractor.
This compact unit offers a lot of the features of the big extractors, but it’s more user-friendly for the mobile detailer. The spotter is the perfect size for carrying at only 17" high, 18" long, and 13" wide and a weight at 26lbs (without the solution.). The 50 ft., 12 gauge cord allows you to work on cars away the power source.
For auto detailing for large numbers of vehicles, The Hot Rods design makes cleaning easier and faster. The 2.5-gallon recovery and 1.5-gallon solution tanks keep The Hot Rod running for hours. Complete more cars in a day with results that keep customers coming back.
In as quickly as eight minutes, the Aztec Hot Rod’s cleaning solution heats up to 200°F. This professional quality hot water extractor features lights that indicate when proper temperatures are reached. The 16 ft. vacuum and spray hoses extend to even the most hard-to-reach areas for total surface coverage. Clean the carpet and upholstery in large SUVs and even RVs with these long hoses.
has designed a superior auto-detailing product, The Hot Rod, to keep carpets
and upholstery looking new and smelling fresh day after day, year after
year. When subjected to the high temperatures of The Hot Rod’s cleaning
solution, the fibers release dirt and stains. Remove built-in soil, oil, or
grease with our high-performance heated vacuum cleaner. The vacuum boasts
102 inches of lift, allowing it to pick up far more than an ordinary vacuum.
|The Aztec Hot Rod Extractor includes a 3 inch stainless steel upholstery
detail tool that stands up to high temperatures. Three 2 inch swivel casters
make it easy to maneuver around the vehicle. The solution and recovery
tanks are easy to access, fill, and clean. All in all, the Aztec Hot Rod
Hot Water Extractor is one powerful, portable carpet cleaning machine. No
spot or stain will remain!
|Features & Specs
- 200°F Heated solution tank
(110°F water heats to 200°F in 8 minutes)
- Ready to use
when dwell time on pre-spray is completed
- 1.5 Gallon solution tank
- 2.5 Gallon recovery tank
- Piston pump delivers 60psi
- 1400 Watt heating element
- Lights indicate when heating
and when temp. is reached
- Power requirement less than
- 3 year limited warranty
- 50 ft, 12 gauge single flow cord
- 16ft 1 1/4" ID flexible vacuum hose
- 16ft 3/16" ID spray hose
- Weight of Spotter without solution is 26lbs
- Maneuvers easily on 2" casters
- Easily accessible to fill, empty and clean
- Dimensions of Spotter: 17" high, 18" long, 13" wide
- Spotter furnished with 3" stainless steel upholstery detail
Fill the solution tank with warm water and connect the
When the indicator light goes off, the Aztec is ready.
We used the Aztec on these old rust stains.
Pretreat with a carpet cleaner. Press the trigger to
release hot water.
Go back and forth over the stain until it disappears.
Carpet and upholstery will look like new!
You too can get results like this with your own hot water carpet extractor!
item is oversized. A shipping rate of $35 applies.
This item is non-returnable.
The Aztec Hot Rod
has a 3 year limited warranty.
This Aztec Carpet
Extractor ships direct from the manufacturer via Ground Service Only.
Expedited and international shipping are not available.
*Discounts are not applicable on this item.