EXtra cutting; EXtra smooth handling; EXtremely easy to use
3M Perfect-It EX Rubbing Compound is for the enthusiast or professional that is looking for EXtra performance from their rubbing compound. Considered 3M’s best rubbing compound, 3M Perfect-It EX Rubbing Compound is EXceptionally easy to work with, even in EXtreme climates. If you’re looking for EXtra cut and EXtra smooth handling, 3M Perfect-It EX Rubbing Compound is for you. Remove swirls, scratches, and water spots without breaking a sweat.
3M Perfect-It EX Rubbing Compound is the replacement for the venerable Perfect-It 3000 Rubbing Compound. 3M Perfect-It EX is noticeably easy to work with, especially in conditions where extreme heat or cold cannot be avoided. 3M Perfect-It EX Rubbing Compound further improves upon and the cutting and finishing abilities of its predecessor in a formula that creates minimal dust.
3M Perfect-It EX Rubbing Compound removes defects quickly and leaves a swirl and haze free finish that is ready for final polishing. 3M Perfect-It EX Rubbing Compound enables you to eliminate the intermediate polishing step so you can go right to your finishing polish, saving you time and money. 3M has long been an innovator in the paint refinishing industry and products like Perfect-It EX Rubbing Compound are the reason!
3M Perfect-It EX Rubbing Compound is capable of removing P1200 and finer sanding scratches, even from hard, low-VOC paints. These scratch-resistant paint finishes are more resistant to paint correction but 3M's unique combination of mineral and chemical technology levels imperfections without the need for harsh abrasives. 3M Perfect-It EX Rubbing Compound feels more like a fine hand lotion than an aggressive rubbing compound.
Use 3M Perfect-It EX Rubbing Compound with a foam or wool compounding pad, such as the Lake Country CCS Yellow Foam Pad or the 8.5 inch DuroWool Cutting Pad. 3M offers these tips to select a pad: wool runs cooler and cuts faster, foam does not lint and leaves a finer finish. 3M Perfect-It EX Rubbing Compound is recommended for use with a rotary polisher. Compound at medium pressure from 1200-2000 rpm with overlapping passes. When the sanding scratches have been removed, reduce pressure on the polisher. Use a microfiber towel to remove the residue from the paint. Follow up with 3M Perfect-It Machine Polish.