> Dr. Beasley’s Film Cleanser

Dr. Beasley’s Film Cleanser

Dr. Beasley’s Film Cleanser Keep your PPF & vinyl wraps cleansed!

Dr. Beasley’s Film Cleanser is a highly effective cleaner designed for automotive paint protection film and vinyl wraps. Used to break down contaminants at the chemical level without damaging the surface, Dr. Beasley’s Film Cleaner doesn’t damage your film, but leaves the surface fully cleansed! If you’ve gone the extra step to make sure your car is protected using PPF, make sure you keep the surface cleaned properly with Dr. Beasley’s Film Cleanser!

Paint protection films and vinyl wraps, while adding both a layer of protection and aesthetic to your paint, tend to be fragile. We don’t understand it either – how can something designed to protect your paint be fragile!? But, alas, it is. And to make sure your PPF and vinyl wraps continue to perform the way they were intended, a specialized cleaner must be used. That’s where Dr. Beasley’s Film Cleanser comes in!

This solvent-free formula works to break down contaminants at the chemical level to safely remove them from the surface. Don’t allow your expensive PPF films and vinyl wraps become etched, stained, or discolored – keep them clean so they can continue to protect your paint with Dr. Beasley’s Film Cleanser!

Directions for use:
1. Spray onto contaminated area.
2. Let sit for 1-2 minute before wiping down with a microfiber towel.
3. If contaminant remains, repeat steps 1-2 and allow for a longer dwell time.

Dr. Beasley's Pro Tips:
1. Do not allow product to dry on surface.
2. Do not scrub or us unnecessary pressure when wiping down
3. If applied to a ceramic coated film, re-apply coating to the affected area after use.
4. Before applying, test a small amount in an inconspicuous area to check for surface compatibility.

12 oz.

Discontinued.