When tenths of a pound matter, depend on Accutire!
The Accutire Racing Gauge measures tire pressure in 0.1 lb increments! Fractions of a pound can make a difference in a race, so this tire gauge reads every small fluctuation in tire pressure. The Accutire Racing Gauge is accurate, dependable, and easy to use.
Racing has a history dating back over a hundred years. It seems that, for as long as automobiles have existed, people have wanted to see how fast they can go! Speed depends on a lot of factors, but most important of all is the condition of the tires. Proper tire pressure allows the engine to work at its optimum level and propel the car at its maximum speed. A fraction of a pound can make the difference between finishing first and just finishing. That’s why the Accutire Racing Gauge measures from 0-60 PSI in 0.1 lb increments.
This is the most accurate tire gauge you can buy! The dial reads like a speedometer in addition to posting the numerical reading in the center of the large, backlit LCD. Because the gauge reads in such small units, you’ll know if you’ve lost any pressure at all. The bleed valve allows you to release a little air at a time until you reach your desired pressure. The quick disconnect valve allows you to measure and go – a key feature on a race track. With a 10” rubber hose, you can easily reach deep-set tires and still get an accurate reading. The shiny, chrome finish makes this a stylish and functional tool.
Pound for pound, the Accutire Racing Gauge is one of the best tire gauges you can buy, particularly if your passion is racing. With a 5 year warranty, this gauge really goes the distance!
AFTER 3 YEARS OF FINE SERVICE, THIS
GAUGE JUST QUIT!!!CAN IT BE REPAIRED OR
REPLACED BY THE SELLER?
September 24, 2010
Works as described. I use it every day. Most accurate gauge I have used.
September 26, 2009
Mine works fine, bleeds down as advertised. Some minor problems with no leak attachment to valve stem, have to jiggle it a little to stop air escaping, probably operator error.
Not As Advertised
November 3, 2008
Please be aware this gauge DOES NOT read in a continuous manner. The function is a sample read. So when you press the gauge onto the valve stem it will take a sample reading and lock it onto the display. Where the writeup says that you can use the bleed valve to make fine adjustments, this is not exactly correct as you cannot see the pressure change on the gauge as you do the bleed. After bleeding some air you must remove the gauge and the reattach it it to make a complete new reading. In my opinion the advertising is completely misleading in the regard.