Step 1 in the Finish Kare Paint Decontamination System.
Finish Kare Soil & Coating Remover / Wax & Detail Pre-Cleaner is part of a four-step system to rid automotive paint of damaging ferrous metals and airborne contaminants. Using this system, you -the professional detailer - can prevent paint damage and create a truly clean, well-protected finish. It all starts with Finish Kare Soil & Coating Remover / Wax & Detail Pre-Cleaner.
The Finish Kare Paint Decontamination System was developed as a method of removing paint contamination beyond what can be removed by washing or claying. If you are familiar with detail clay, you know it is capable of removing above surface contaminants that have bonded to the paint. The Finish Kare Paint Decontamination System is designed to remove what lies below the paint surface.
Airborne chemical compounds and ferrous particles - particles containing iron - actually penetrate the paint and create corrosive compounds that eat deep into the paint's sub-layers. This is a gradual process that often is not evident until it's too late. Claying or polishing only removes the particle, not it's effects, which are continuing to spread beneath the surface.
Finish Kare Soil & Coating Remover / Wax & Detail Pre-Cleaner is the first step in this system. It is a fully biodegradable, alkaline based cleaner with inhibitors for safe usage. It removes outer surface rust, iron oxides, soil coatings, and vehicle wrap adhesives while cleaning and preparing the surface for step two.
To use Finish Kare Soil & Coating Remover / Wax & Detail Pre-Cleaner, dilute 1 part Soil Remover to 4 parts water. Rinse the vehicle to remove dust and loose soil. Then wash with Finish Kare Soil & Coating Remover / Wax & Detail Pre-Cleaner and a wash mitt. Use light pressure to agitate the vehicle, working it in for 5-10 minutes. Rinse the entire vehicle with cold water. Then dry the horizontal surfaces of the vehicle.
After using Finish Kare Soil & Coating Remover / Wax & Detail Pre-Cleaner, the outer paint will be stripped of waxes and silicones and all surface contamination. Paint contamination can be layers deep, so the Finish Kare addresses these layers step by step. After the outer paint layer is clean, Step 2 Finish Kare SIRR Steel, Iron Rust Remover will neutralize and remove ferrous particles.
It is very important to follow all four steps in the Finish Kare Paint Decontamination System in their prescribed order. The sequence of alkaline, acidic, and neutral cleaners helps counteract the effects of the paint contaminants.
The Finish Kare Paint Decontamination System is used by body shops for pre-cleaning prior to detailing and by dealerships for new and used car prep. It is proven to deliver a clean, glassy smooth vehicle that is protected from the harmful effects of paint contamination. No other is as fast and effective at removing multi-layer paint contamination.
Complete paint decontamination starts with Finish Kare Soil & Coating Remover / Wax & Detail Pre-Cleaner.