Three times the product for high volume detailers!
Detailers, maximize your profits with the Diamondite Professional Clear Plastic Kit for Headlight Lenses. This kit contains three times the products available in the consumer kit, at a tremendous value. Polish and restore up to 25 pairs of headlights with a single professional kit. With the Diamondite Professional Clear Plastic Kit for Headlight Lenses, you can deliver clean, clear headlights for customers and increased profitability for your business.
The Diamondite Professional Clear Plastic Kit for Headlight Lenses is a complete three step system that cleans, clarifies, and protects OEM polycarbonate headlight lenses covers, acrylic, Plexiglas, and other hard, unpainted plastics. Our trials have shown that the Diamondite Clear Plastic Kit increases the amount of light reaching the road by up to 80%. Scratches are reduced by as much as 60%. But the impact on your driving safety is immeasurable!.
Here are some important facts to know about polycarbonate headlight lens covers. While they are shatter-resistant, they do oxidize just like any plastic. Clouded lenses can reduce the amount of light illuminating the road by as much as 90%. The oxidized plastic refracts the light that is passing through the lens cover, creating a glare that is distracting to other drivers. A vehicle’s headlights should light the road at least 150 feet in front of the vehicle. If they do not, the driver does not have enough advance visual warning to avoid a potentially dangerous and expensive accident.
The Diamondite Clear Plastic Kit includes:
12 oz. Diamondite Clear Plastic Enhancer
12 oz. Diamondite Clear Plastic Restorer
12 oz. Diamondite Clear Plastic Liquid Armor
3 Yellow 4 inch Foam Cutting Pad
3 Orange 4 inch Foam Light Cutting Pad
2 3/4 inch backing plate
2 Microfiber Towels
That's triple the contents of the regular Diamondite Clear Plastic Kit!
Clear Plastic Enhancer
Diamondite Clear Plastic Enhancer is step one in the Diamondite Clear Plastic Kit. This cleaner/polish removes fine scratches and haze from clouded plastic headlight lenses and other hard plastic surfaces. Specially milled diminishing abrasives combined with lubricants and cleaners all work to smooth and clarify cloudy lenses. Clear Plastic Enhancer lifts dirt and oils out of hairline scratches as the abrasives level the edges to reduce their appearance. Like a premium car polish, Clear Plastic Enhancer cleans and smoothes headlight lenses and leaves a clear, shiny surface.
Clear Plastic Restorer
Diamondite Clear Plastic Restorer is the second step in the Diamondite Clear Plastic Kit. This is a very fine grade finishing glaze that restores the shine and optical clarity to polished headlight lens covers and other hard plastics. While Diamondite Clear Plastic Enhancer is the heavy-hitter, Diamondite Clear Plastic Restorer is the gentle finishing touch that finesses the plastic back to its factory-new appearance.
Clear Plastic Liquid Armor
Diamondite Clear Plastic Liquid Armor protects the newly restored headlight lens from future oxidation and UV damage with durable polymers. Polymers fill in the microscopic grooves and pores of the plastic to completely block out moisture, dirt, and UV radiation. Clear Plastic Liquid Armor contains the strongest UV shield available in a plastic protectant. This water-based formula will not dry out plastic surfaces, and it leaves a clear, protective gloss that lasts for months.
Before you begin…
Tape off the area surrounding the headlights using painter’s tape. Clean off any loose debris using Diamondite Perfect Vision Glass Cleaner and a soft microfiber towel. Screw the drill adapter into the included backing plate and tighten with a wrench. Insert the adapter into your electric drill and tighten the chuck.
* Depending on the severity of the headlights, you may wish to use a rotary polisher. The included backing plate attaches directly to a standard rotary polisher. Use the same speeds listed below.
Step 1 – Clear Plastic Enhancer
Press the included yellow cutting pad onto the backing plate. Apply Diamondite Clear Plastic Enhancer™ in an X pattern across the pad. If you are using a drill or rotary polisher, set the maximum speed at 1800 RPM. Work in an overlapping motion until cleaner breaks down into a clear film. Work up and down and side to side. There is no need to apply pressure to the machine. Use the included soft microfiber towel to remove residue. Severely stained or scratched lenses may require a second treatment.
Step 2 – Clear Plastic Restorer
Remove the yellow cutting pad and attach the included orange light cutting pad. Dispense Clear Plastic Restorer in an X pattern across the orange pad. Work at a speed of 1800 RPM on your electric drill. Move the pad up and down and side to side for complete coverage. When the polish starts to dry, turn off the drill and slowly lift it off the headlight lens cover. Wipe the headlight clean with the included microfiber towel. Repeat step 2 if necessary.
Step 3 – Clear Plastic Liquid Armor
Mist the headlight lens with Clear Plastic Liquid Armor. Two or three pumps should be enough to cover the lens. Use a microfiber towel to spread the sealant over the lens and flip the towel to buff dry. Allow the sealant to cure for an hour and then apply another coat if desired.
One kit treats up to 25 pairs of headlights. That's less than $2 a headlight! The Diamondite products alone are valued at $80.97 when purchased separately. The Diamondite Professional Clear Plastic Kit for Headlight Lenses gives you the complete lens polishing system for less than $20 more. And it's worth it.
The results are truly amazing. The Diamondite Professional Clear Plastic Kit for Headlight Lenses improves lens clarity, smoothness, and light emission. Headlights will look better and work better, resulting in satisfied repeat customers.
A total retail value of $151.87. Save $51.88!
Add on a Dual Action Adapter for just $4.99. This adapter allows you to use the backing plate in this kit with your dual action polisher. Note:Tighten the adapter into the backing plate using a ¾ inch wrench.
If you only need to restore your own vehicle's headlights, get the smaller Diamondite Clear Plastic Kit (available below). It contains enough products to restore 6-8 pairs of headlights.
Diamondite Professional Clear Plastic Kit for Headlight Lenses
4 Stars based on 2 Review(s)
Fort Lauderdale, Florida
Did not fully clear my lenses
May 29, 2014
I used the product on my 2008 Chrysler 300. The headlights are better than they were however they still need additional work.
Easy to use
Did not restore lenses full clarity
January 29, 2013
Bought this to add a service to my small business, and its paid after the first job. Does a great job and has everything I needed to get started. I would suggest to buy the DA adapter with this kit cause it goes by so much faster!