Tackle smooth and contoured surfaces with precision.
MIRKA Abralon Sanding Discs feature a unique, multi-functional sanding material developed for tackling both smooth and profiled surfaces. Its patented, flexible construction allows it to create a smooth sanding pattern on angled surfaces and edges while minimizing the risk of pressure marks. The flexible weave also allows water and air to pass freely, making it suitable for both dry and wet sanding, by machine or by hand. Use MIRKA Abralon Sanding Discs to remove orange peel from paint or oxidation from gel coat. Available in 3 and 6 inch diameters.
Removing orange peel with any old sanding disc is easy, but achieving a perfectly smooth finish with no defects afterwards is the difficult part of the process that most people struggle with. Enter MIRKA Abralon Sanding Discs: MIRKA Abralon Sanding Discs feature the most advanced abrasive technology the industry has to offer, enabling you to create a perfectly smooth finish through uniform material removal. Sanding marks created by MIRKA Abralon Sanding Discs are easier to remove compared to lesser, inexpensive sanding discs.
MIRKA Abralon Sanding Discs feature a foam interface that makes them easier to control and more versatile. MIRKA Abralon Sanding Discs are easier to control because the foam interface acts as a cushion for curves and contours. MIRKA Abralon Sanding Discs are more versatile because they can be used for wet or dry sanding on both painted finishes and gel coat. Use MIRKA Abralon Sanding Discs to remove stubborn scratches that are too deep to remove with a compound or polish.
By leveling the material around the scratch, you create a flat surface that when polished to a high gloss, reduces the appearance of the scratch if not eliminating it completely. MIRKA Abralon Sanding Discs can be used to machine sand headlights, remove oxidation from gel coat, orange peel from clear coat and lacquer finishes, and much more! Use wet or dry depending on the level of cut you desire.