5.5 Inch Lake Country SDO CCS Pads
Lake Country SDO Pads have been designed to offer the same great engineered foams as the HDO line, without the dual layer constructions. Lake Country SDO Pads are designed for use on all DA polishers with a center ventilated backing plate. Lake Country SDO Pads feature a center hole that provides a tunnel to release and dissipate heat from the foam and reduce surface temperatures and risk of damage to the paint.
Lake Country SDO Pads feature:
Tapered Edge – This prevents the pads from rolling and provides great pad rotation. Great for curved and contoured panels. Allows for precision polishing in tight areas.
HDO Formulation – Consistent performance and firmness throughout heat cycle and user experience.
Center ventilated cooling channel – Dissipates heat away from the center of the pad, reducing temperatures and increasing durability. The system also allows for perfect pad alignment.
Designed together – The Lake Country SDO Pads pairs perfectly with the Lake Country Low Lint Lambswool Pads!
Conventional foam pads absorb polish too quickly hence reducing polish and pad performance because most of the polish is trapped below the working surface of the pad. CCS Technology® solves this common problem using strategic patterns of partially closed foam cells.
- Slows rate of polish absorbtion.
- Improves operator control. CCS pockets reduce surface tension.
- Allowing operator to run the pad flat on the working surface.
- Prevents pad skipping.
- Creates less heat.
|SDO CCS Blue Foam Heavy Polishing Pad:
Firm, medium density foam for scratch and defect removal. Use this pad with polishes and swirl removers. It's an all around pad that will work on most light to moderate imperfections.
|SDO CCS Orange Foam Polishing Pad:
Less dense foam formula for the application of cleaner waxes and light polishes. This pad has very light cutting power so it's perfect for the removal of light defects and micro marring.
|SDO CCSBlack Foam Finishing Pad:
Composition is firm enough to withstand added pressure during final finishing to remove buffer swirls. It has very little cut and will apply thin, even coats of waxes, sealants, and glazes, and ultra fine polishes.
5.5 inch pads are for use with a 5-inch backing plate.