null

Jescar Ultra Lock Product Application Guide by Je

Jescar product group shot.

Jescar has been independently developing their own products for more than 10 years now, with one of the first being the industry standard Power Lock+ polymer sealant. Recently, Jescar introduced the all new Ultra Lock+ ceramic polymer sealant. How does Ultra Lock+ build on the success of Power Lock? SiO2 technology improves the hydrophobic properties of Power Lock even further for better performance than ever. Ultra Lock+ gives you approximately 8 months of protection from dirt, contaminants, and UV rays, months longer than Power Lock+'s exceptional durability.

Using Ultra Lock+ is simple.

1. Wash the vehicle with a high quality auto shampoo like Jescar Auto Wash and dry completely.

2. Temperature should be above 50 degrees F and surface should not be too hot. Working in the shade is best.

3. Shake bottle well, then apply a thin layer of product onto the vehicle, working on one section at a time before moving to the next. Apply to the entire paint surface, glass sunroof, headlights, and tail lights with a soft foam applicator pad.

Apply a thin layer of product with a foam applicator.   Apply a thin layer of product with a foam applicator.

4. Let product dry to a haze for at least 30 minutes.

5. Simply wipe off the residue with clean, dry microfiber towels.

Allow to dry to a haze before buffing away.   Allow to dry to a haze before buffing away.

Ultra Lock+ is the final step of the Jescar Finish Products system. When you want to buff the surface to a perfect gloss first, make sure to use Jescar Correcting Compound and Jescar Fine Polish before applying Ultra Lock+.

You can perfect your paint first using other Jescar products.   You can perfect your paint first using other Jescar products.

Tips & Suggestions:

  • Use UltraLock+ sparingly as a small amount will go a long way.
  • Avoid applying to textured plastic trim.
  • You can apply either by hand or with a DA machine. Using a machine will allow you to spread the product more evenly and quickly.
  • For best results, use a Jescar Blue Foam finishing pad with your DA polishing machine.
  • Applying a second layer of Ultra Lock+ gives additional longevity to the protection. Just be sure to wait at least 3 hours before applying it the second coat.
  • You can extend the life even further by periodic use of Jescar
    Ceramic Spray Wax.