FLEX XC3401 XMT Light Swirl Remover Kit FREE SHIPPING
For a Limited Time receive the Flex Polisher Instructional DVD and a Mike Phillips’ The Complete Guide to a Show Car Shine Paperback Book FREE with your purchase! Retail Value $32.98.
Restore a picture perfect finish to your vehicle!
Remove light imperfections and restore a showroom shine with the FLEX XC3401 XMT Light Swirl Remover Kit. This kit includes all the Lake Country pads and XMT polishes necessary to bring dull paint back to life. The FLEX Xc3401 Orbital Polisher makes it possible with its true orbital motion and smooth operation. The power to perfect your vehicle’s finish is in your hands with the FLEX XC3401 XMT Light Swirl Remover Kit.
Light swirl marks are the most common paint problem on the road today. Even brand new vehicles can have fine swirls in the paint, even before they leave the dealership! The FLEX XC3401 XMT Light Swirl Remover Kit is your solution. Pinnacle XMT swirl removers polish away mild imperfections without causing new ones. Lake Country CCS foam pads improve your results with foam designed to address different paint imperfections.
The FLEX XC3401 XMT Light Swirl Remover Kit is ideal for like-new vehicles with light swirls, water spots, and dull paint.
The FLEX XC3401 XMT Light Swirl Remover Kit includes:
|FLEX XC3401 VRG Orbital Polisher Variable Speed
The orbital rotation of the FLEX Polisher simulates the circular movement of the human hand while polishing. This motion is less likely to cause holograms than a rotary buffer. At the same time, the polisher's highly smooth running facilitates a careful, precise finish and allows for hologram-free polishing. The positive drive ensures a uniform movement, even under load, thanks to constant lift. Taken in conjunction with the large stroke length the FLEX can remove existing holograms from black finishes. The large stroke length refers to the size of the orbit. On many dual action polishers, this is a very small distance and therefore you feel a jiggling motion. On the FLEX polisher, the stroke length is 8 mm, a huge distance in terms of orbital polishers! The FLEX Dual-Action Polisher has a true dual action motion that reduces vibration. The FLEX Orbital Polisher’s smooth acceleration and uniform, controlled motion make this DA machine ideal for novices and pros alike. The FLEX XC3401 dual action polisher comes with a 5.5 Inch Hook & Loop Backing Plate and a 1 year manufacturer warranty.
|12 oz. XMT Fine Swirl Remover #2
Pinnacle XMT Fine Swirl Remover is a blend of mild abrasives and lubricating oils that remove light to moderate imperfections on aging paint finishes. If your vehicle is not new but has no severe paint damage, this is the swirl remover for you. It removes light to moderate imperfections like swirls, mild scratches, and light oxidation without reducing surface gloss. You will not need a finishing polish.
|12 oz. XMT Ultra Fine Swirl Remover #1
This polish is made with such small abrasives that you can’t see them with the naked eye. The sheer number and minute size of the abrasive particles blend away fine flaws in the clear coat without leaving any trace of surface marring or haze. Just like a fine jeweler’s rouge, XMT’s Concentrated Micro Abrasives leave the paint finish glossy and smooth, just like new. XMT Ultra Fine Swirl Remover is for like-new paint that is just starting to show signs of age. It can also be used as a finishing polish.
|12 oz. XMT Carnauba Finishing Glaze
The gentle cleaners blend away minor flaws - like spider webbing, haziness, and overall dullness – to increase depth and clarity. At the same time, a layer of carnauba bonds to the paint surface to further enhance the dynamic shine created by the glaze. What can’t be removed with the cleaners is filled in with carnauba to create a smooth, flawless finish. It’s perfection and protection in one! Use XMT Carnauba Finishing Glaze as the finale to your detailing process. To increase depth and brilliance, top the glaze with Pinnacle Signature Series II.
|1 CCS Orange 6.5 Inch Light Cutting Pad
Firm, high density foam for scratch and defect removal. Use this pad with polishes and swirl removers. It’s an all around pad that will work on most light to moderate imperfections.
|1 CCS White 6.5 inch Polishing Pad
This high absorption foam formula is intended for the application of waxes, micro-fine polishes and sealants. This pad has very light cutting power so it’s perfect for pre-wax cleaners.
|2 CCS Gray 6.5 Inch Finishing Foam
Least abrasive. Composition is firm enough to withstand added pressure during final finishing to remove buffer swirls. Use with machine glaze or finishing polish. Ultra-soft and incredible for a putting on that finishing touch.
|2 Microfiber Towels (16 x 16 inches)
The Microfiber Towel is spun from an 80/20 polyester/polyamide blend, producing a highly refined microfiber. The microscopic polyester/polyamide fibers are split with a unique process that creates a “feathered” weave on one side for buffing and looped fibers on the other side, which are excellent for cleaning. This superior “feather” weave results in far greater absorption properties in a virtually lint free network of fibers.
|1 Polish ‘N Wax Applicator
This two-sided applicator is an excellent tool for cutting in close around trim and mirrors, places that your polisher can’t go. The foam applicator has gray finishing foam on one side and orange light cutting foam on the other.
|12 oz. Pinnacle XMT Polishing Foam Pad Cleaner
Pinnacle XMT Polishing Pad Cleaner contains a degreasing agent that breaks up oil and eliminates every last trace of residue. Soap (as in dish soap) can leave a residue of its own, so there is no soap in this cleaner. Intense cleaners and degreasers break up oily deposits left by car care products so the pad rinses completely clean. This pad cleaner is ready to use in a convenient pump spray bottle.
|12 oz. Pinnacle XMT Polishing Foam Pad Conditioner
Prevention of dry buffing is as easy as misting an unused pad with Pinnacle XMT Polishing Pad Conditioner. It only takes a couple of spritzes to prep the pad for polishing. The rich lubricants instantly penetrate the pad, softening and conditioning the material. Even if the pad has never been used, it will glide across the paint like you’re halfway through the detail session.
Use the products as follows:
- Prep pads before polishing with Pinnacle XMT Polishing Pad Conditioner. On significant swirls and flaws, apply XMT Light Swirl Remover #2 with the orange pad. Buff after each section using one of the included microfiber towels.
- Apply XMT Ultra Fine Swirl Remover #1 with the white polishing pad. You can do an all-over polish to remove the lightest imperfections with this gentle swirl remover. Buff off residue after each section.
- Your paint should be in great shape at this point. Apply XMT Carnauba Finishing Glaze with one of the gray foam pads. Buff off the residue as you complete each section.
- Your vehicle will be glossy and reflective after applying the glaze. For the deepest shine and longer-lasting protection, use the second gray pad to apply your favorite wax. We recommend Pinnacle Signature Series II Carnauba Paste Wax for a fantastic reflection on any color.
- Clean each pad after use with Pinnacle XMT Polishing Pad Cleaner. Spray each pad generously with the cleaner and toss them in a bucket of clean water. Agitate with a Foam Conditioning Brush if necessary. Rinse well and let air dry.
For light imperfections and swirls, choose the FLEX XC3401 XMT Light Swirl Remover Kit. Sophisticated swirl removers and a user-friendly polisher will restore your vehicle’s shine.
FLEX XC3401 XMT Light Swirl Remover Kit includes:
FLEX XC3401 VRG Orbital Polisher
12 oz. XMT FineSwirl Remover #2
12 oz. XMT Ultra Fine Swirl Remover #1
12 oz. Carnauba Finishing Glaze
6.5 inch CCS Orange Light Cutting Pad
6.5 inch CCS White Polishing Pad
2- 6.5 inch CCS Gray Finishing Pads
2- 16 x 16 inch Microfiber Towels
12 oz. XMT Polishing Pad Cleaner
12 oz. XMT Polishing Pad Conditioner
Polish ‘N Wax Applicator
A total retail value of $519.39. SAVE $79.40!
|Upgrade to the
FLEX XC3401 VRG Heavy-Duty!
The HD model has an all rubber, 25 foot power cord hardwired into the polisher. The longer cord is more convenient than an extension cord and it is gauged to deliver maximum power to the polisher for safe, efficient operation. (Standard cord is 9 ft.)
Select the HD model from the drop-down menu below.